Registration plate WU51ANV
Official local mnemonic: West of England
Postal area: Bristol
Issued: between september 2001 and february 2002
Black Piaggio Zip, manufactured in 2001, first registered on 1 October 2001. Cylinder capacity: 49cc.
As of 30 September 2010 this vehicle had done 17,869 miles. Current estimated odometer reading: 25,200 miles.
✗ Untaxed Tax due: 29 August 2012
✗ No MOT Expired: 29 September 2011

MOT history

Test dateExpiry dateResultOdometer reading
2010-09-302011-09-29 Pass17,869
  • Steering headbearing has slight free play (2.2.2)
  • Nearside Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Offside Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Front suspension has a slightly reduced damping effect (2.3.6c)
  • Nearside Front suspension assembly slightly corroded. (2.3.1)
  • Centre Upper Front suspension assembly slightly corroded. (2.3.1)
  • Front Wheel corroded but not significantly reducing the original strength (4.2.1a)
  • Front Tyre worn close to the legal limit (4.1.3(i))
  • Centre Lower Motorcycle structure slightly corroded (6.1.1a)
  • Oil leak
  • slight binding front brake not enough to show on tester
  • front tyre cracking
2010-09-30- Fail17,869
  • Steering headbearing has slight free play (2.2.2)
  • Nearside Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Offside Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Front suspension has a slightly reduced damping effect (2.3.6c)
  • Nearside Front suspension assembly slightly corroded. (2.3.1)
  • Centre Upper Front suspension assembly slightly corroded. (2.3.1)
  • Front Wheel corroded but not significantly reducing the original strength (4.2.1a)
  • Front Tyre worn close to the legal limit (4.1.3(i))
  • Centre Lower Motorcycle structure slightly corroded (6.1.1a)
  • Oil leak
  • slight binding front brake not enough to show on tester
  • front tyre cracking
  • Headlamp aim too low (1.6)
2009-09-292010-09-28 Pass16,837
  • Steering movement slightly 'notchy' (2.2.1b)
  • Lower Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Nearside Lower Front suspension assembly slightly corroded. (2.3.1)
  • Exhaust slightly deteriorated (7.1.1a)
  • Rear Tyre worn close to the legal limit (4.1.3(i))
  • Wheel alignment slightly misaligned. (2.5.1)
  • Oil leak Dangerous
2009-09-24- Fail16,837
  • Steering movement slightly 'notchy' (2.2.1b)
  • Lower Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Nearside Lower Front suspension assembly slightly corroded. (2.3.1)
  • Exhaust slightly deteriorated (7.1.1a)
  • Rear Tyre worn close to the legal limit (4.1.3(i))
  • Wheel alignment slightly misaligned. (2.5.1)
  • Oil leak Dangerous
  • front and rear tyre pressure low
  • Rear shock absorber seal failed and leaking oil (2.4.A.1c)
  • Rear shock absorber has inadequate damping effect. (2.4.A.3b)
  • Headlamp deteriorated and function impaired (1.2.3a)
  • Front Roller brake test indicates a binding brake (3.3.A1a)
  • Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)
  • Headlamp aim too low (1.6)
2008-09-132009-09-28 Pass12,474
  • Steering movement slightly rough. (2.2.1b)
  • Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Rear shock absorber has a light misting (2.4.A.1c)
  • Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)
2008-09-11- Fail12,474
  • Steering movement slightly rough. (2.2.1b)
  • Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Rear shock absorber has a light misting (2.4.A.1c)
  • Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)
  • Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)
  • Throttle operating incorrectly (6.2.1f)
  • Horn not working (1.7.3a)
  • Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))
  • Headlamp at least one does not illuminate on main beam (1.2.2a(ii))
  • Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)
2007-09-292008-09-28 Pass10,980
  • Steering movement slightly 'notchy' (2.2.1b)
2007-09-25- Fail10,980
  • Front suspension assembly has slight free play between the sliding members (2.3.4)
  • Steering movement slightly 'notchy' (2.2.1b)
  • Nearside Front suspension has inadequate damping effect. (2.3.6c)
  • Offside Front suspension has inadequate damping effect. (2.3.6c)
  • Rear shock absorber has inadequate damping effect. (2.4.A.3b)
  • Front wheel bearings have excessive free play (2.3.5b)
  • Front wheel bearings are excessively rough (2.3.5b)
  • Indicator switch defective (1.5.4)
2006-09-272007-09-26 Pass10,980

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
Select file

You agree that you accept our rules

Worst drivers in November

  1. HX16 XTE
  2. LS65 GWJ
  3. FV09 URU
  4. OV11 FHC
  5. PE63 ZVM
  6. YF62 HPV
  7. DP66 SRX
  8. BJ07 FTK
  9. GY63 EPF
  10. K51 FLY
View drivers' rankings from previous months »