Test date | Expiry date | Result | Odometer reading |
2018-06-05 | 2019-06-04 | ✓ Pass | 117,453 |
2017-06-01 | 2018-06-01 | ✓ Pass | 111,001 |
- nearside & offside front tyres are worn badly on the outer edges
|
2017-06-01 | - | ✗ Fail | 111,000 |
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- nearside & offside front tyres are worn badly on the outer edges
- Nearside Registration plate lamp not working (1.1.C.1d)
- Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
|
2016-05-21 | 2017-06-01 | ✓ Pass | 102,311 |
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside rear lower arm outer bush has slight play
- Offside rear lower arm outer bush has slight play
- Rear brake pads getting low
- Nearside rear tyre on the wear bars
- Offside rear tyre close to wear bars
|
2016-05-21 | - | ✗ Fail | 102,311 |
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside rear lower arm outer bush has slight play
- Offside rear lower arm outer bush has slight play
- Rear brake pads getting low
- Nearside rear tyre on the wear bars
- Offside rear tyre close to wear bars
- Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
- Bonnet cannot be secured in the closed position Nearside catch not locking (8.4.1)
|
2015-05-30 | 2016-06-01 | ✓ Pass | 96,254 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nearside Rear Brake pad(s) wearing thin (3.5.1g)
- Offside Rear Brake pad(s) wearing thin (3.5.1g)
|
2014-05-31 | 2015-06-01 | ✓ Pass | 90,809 |
- front brake pads worn low
- damage to offside door mirror
- front brake hoses perished
- engine oil leaks
- play in o0ffside rear lower hub bush.(Marked)..
|
2013-05-28 | 2014-06-01 | ✓ Pass | 84,378 |
- Front Brake pad(s) wearing thin (3.5.1g)
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
- Nail in offside rear tyre
- drivers door mirror casing broken
- Oil leak
|
2012-06-02 | 2013-06-01 | ✓ Pass | 76,893 |
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- off side front tyre is worn on the outer edge
- nail in nearside front tyre
|
2012-06-02 | - | ✗ Fail | 76,889 |
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- off side front tyre is worn on the outer edge
- nail in nearside front tyre
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) Dangerous
- Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) Dangerous
|
2011-05-24 | 2012-05-28 | ✓ Pass | 64,932 |
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- n/s/r tyre has deep cuts & has a nail in it
|
2010-05-27 | 2011-05-28 | ✓ Pass | 51,953 |
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Child seat fitted not allowing full inspection of adult belt
- nearside and offside front tyres weraing inner and outer edges and have deep cuts in tread
|
2010-05-27 | - | ✗ Fail | 51,953 |
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Child seat fitted not allowing full inspection of adult belt
- n/s/f & o/s/f tyres are worn on inner & outer edges & deep cuts in the tread
- Nearside Registration plate lamp not working (1.1.5c)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
2009-05-01 | 2010-05-28 | ✓ Pass | 39,509 |
2008-05-02 | 2009-05-28 | ✓ Pass | 29,069 |
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
|
2008-05-01 | - | ✗ Fail | 29,069 |
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|