Test date | Expiry date | Result | Odometer reading |
2018-07-17 | 2019-07-19 | ✓ Pass | 210,425 |
2018-07-04 | - | ✗ Fail | 209,620 |
2017-07-20 | 2018-07-19 | ✓ Pass | 199,017 |
2016-07-01 | 2017-07-02 | ✓ Pass | 192,071 |
- Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)
- Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)
- Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
- Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
- Nearside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)
|
2016-06-21 | - | ✗ Fail | 192,071 |
- Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)
- Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)
- Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
- Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
- Nearside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)
- Parking brake: efficiency below requirements (3.7.C.1b)
- Nearside Front position lamp(s) not working (1.1.A.3b)
- Rear fog lamp not working (1.3.2b)
|
2015-07-03 | 2016-07-02 | ✓ Pass | 189,267 |
2015-07-03 | - | ✗ Fail | 189,267 |
- Nearside Front All position lamps not working (1.1.A.3b)
- Offside Headlamp aim too high (1.8)
|
2014-02-13 | 2015-02-12 | ✓ Pass | 176,842 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Under-trays fitted obscuring some underside components
|
2014-02-13 | - | ✗ Fail | 176,842 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Under-trays fitted obscuring some underside components
- Offside Front position lamp(s) not working (1.1.A.3b)
- Registration plate lamp not working (1.1.C.1d)
- Offside Headlamp aim too low (1.8)
|
2013-02-05 | 2014-02-06 | ✓ Pass | 152,639 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Under-trays fitted obscuring some underside components
|
2013-02-04 | - | ✗ Fail | 152,639 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Under-trays fitted obscuring some underside components
- Nearside Brake pipe inadequately clipped (3.6.B.1)
|
2012-01-30 | 2013-02-06 | ✓ Pass | 126,828 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
|
2012-01-26 | - | ✗ Fail | 126,657 |
- Front registration plate deteriorated but not likely to be misread (6.3.1d)
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
- Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
- Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)
- Offside rear parking brake recording little or no effort (3.7.B.6a)
|
2011-02-03 | 2012-02-06 | ✓ Pass | 102,362 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
|
2011-02-02 | - | ✗ Fail | 102,361 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Offside Headlamp aim too low (1.8)
- Nearside Headlamp not working on dipped beam (1.7.5a)
- Parking brake: efficiency below requirements (3.7.B.7)
|
2010-01-26 | - | ✗ Fail | 78,162 |
- Front Brake pad(s) wearing thin (3.5.1g)
- Nearside Registration plate lamp not working (1.1.5c)
|
2010-01-26 | 2011-02-06 | ✓ Pass | 78,162 |
- Front Brake pad(s) wearing thin (3.5.1g)
|
2009-02-07 | 2010-02-06 | ✓ Pass | 55,826 |
2008-04-18 | 2009-05-17 | ✓ Pass | 46,896 |
2008-04-18 | - | ✗ Fail | 46,896 |
- Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
- Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|