| Test date | Expiry date | Result | Odometer reading |
|---|
| 2018-01-12 | 2019-01-11 | ✓ Pass | 186,699 |
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
|
| 2018-01-06 | - | ✗ Fail | 186,692 |
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
- Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded boot floor (2.4.A.3)
- Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger (2.4.A.3)
- Offside Rear Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
- Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch to wing (2.4.A.3)
- Stop lamp not working (1.2.1b)
- Exhaust emits an excessive level of metered smoke (7.4.B.3a)
- Offside Headlamp aim too low (1.8)
- Nearside Rear Shock absorber has an excessively worn bush (2.7.4)
|
| 2017-01-05 | 2018-01-06 | ✓ Pass | 182,851 |
- Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
- Offside Rear Outer Body has slight corrosion arch (6.1.B.2)
- Nearside Rear Outer Body has slight corrosion arch (6.1.B.2)
- Rear Lower Body has slight corrosion pack panal (6.1.B.2)
|
| 2017-01-03 | - | ✗ Fail | 182,847 |
- Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
- Offside Rear Outer Body has slight corrosion arch (6.1.B.2)
- Nearside Rear Outer Body has slight corrosion arch (6.1.B.2)
- Rear Lower Body has slight corrosion pack panal (6.1.B.2)
- Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Offside Rear Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)
- Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)
- Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 1/4 panal (6.1.B.2)
- Offside Rear Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings 1/4 panal (6.1.B.2)
- Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill to step (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded step (2.4.A.3)
- Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
|
| 2016-01-04 | 2017-01-06 | ✓ Pass | 178,704 |
- Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- gear box mounting split
- Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
- Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
- Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
- Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
|
| 2016-01-04 | - | ✗ Fail | 178,704 |
- Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
- gear box mounting split
- Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
- Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
- Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
- Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
- Registration plate lamp not working both (1.1.C.1d)
- Nearside Rear position lamp(s) not working (1.1.A.3b)
- Offside Headlamp aim does not move downwards when dipped (British American headlamp) (1.8.C.4)
|
| 2015-01-07 | 2016-01-06 | ✓ Pass | 175,050 |
- Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Gearbox mounting defective
|
| 2015-01-07 | - | ✗ Fail | 175,055 |
- Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Gearbox mounting defective
- Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
- passenger door cannot be opened from outside the vehicle (6.2.B.1c)
|
| 2014-01-31 | 2015-02-21 | ✓ Pass | 169,657 |
- Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Gearbox mounting defective
|
| 2014-01-29 | - | ✗ Fail | 169,657 |
- Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Gearbox mounting defective
- Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
|
| 2013-02-18 | 2014-02-21 | ✓ Pass | 164,113 |
| 2013-02-12 | - | ✗ Fail | 164,101 |
- near side rear arch corroeded
- Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
|
| 2012-02-15 | 2013-02-21 | ✓ Pass | 158,881 |
- near side rear arch to sill corroeded
|
| 2012-02-15 | - | ✗ Fail | 158,881 |
- near side rear arch to sill corroeded
- Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
|
| 2011-02-22 | 2012-02-21 | ✓ Pass | 154,834 |
| 2011-02-22 | - | ✗ Fail | 154,834 |
- Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
|
| 2010-02-09 | 2011-02-12 | ✓ Pass | 84,702 |
| 2009-02-13 | 2010-02-12 | ✓ Pass | 80,931 |
- advise battery flat needs charging
|
| 2009-02-12 | - | ✗ Fail | 80,931 |
- advise battery flat needs charging
- Registration plate lamp not working (1.1.5c)
- Offside Rear fog lamp not working (1.3.2b)
- Nearside Stop lamp not working (1.2.1b)
- Nearside Rear All position lamps not working (1.1.A.3b)
- Horn not working (1.6.2a)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2007-11-13 | 2008-11-28 | ✓ Pass | 71,304 |
| 2006-11-23 | 2007-11-28 | ✓ Pass | 35,639 |
Official local mnemonic: Birmingham