Test date | Expiry date | Result | Odometer reading |
2018-05-10 | 2019-05-11 | ✓ Pass | 70,826 |
- Offside Front Road wheel slightly damaged (4.2.A.1a)
|
2017-05-12 | 2018-05-11 | ✓ Pass | 68,225 |
2017-05-05 | - | ✗ Fail | 68,213 |
- Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Front Shock absorber has a serious fluid leak (2.7.3)
|
2016-03-23 | 2017-03-23 | ✓ Pass | 62,364 |
2015-03-23 | 2016-03-23 | ✓ Pass | 55,671 |
2014-03-21 | 2015-03-23 | ✓ Pass | 51,533 |
- Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
- Wipers smearing.
- Bonnet release cable faulty.
|
2014-03-21 | - | ✗ Fail | 51,533 |
- Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
- Wipers smearing.
- Bonnet release cable faulty.
- Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) Dangerous
- Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
|
2013-03-21 | 2014-03-23 | ✓ Pass | 43,648 |
- bonnet cable not connected to bonnet pull,still able to open
- slight cracks in both rear tyre treads
- minor play at both sides of inner steeringrack
- rear brakepads about 3.5mm left
|
2012-03-23 | 2013-03-23 | ✓ Pass | 37,163 |
- bonnet cable not properly located in lever
- nsr seatbelt couldnt be tested correctly,as childseat is fitted
|
2012-03-23 | - | ✗ Fail | 37,163 |
- bonnet cable not properly located in lever
- nsr seatbelt couldnt be tested correctly,as childseat is fitted
- Offside Headlamp aim too high (1.8)
|
2011-03-23 | 2012-03-23 | ✓ Pass | 32,654 |
- Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
- osf tyre down to 2mm on edges
- nsf tyre down to limit of 1.6mm
|
2010-03-13 | 2011-03-23 | ✓ Pass | 23,127 |
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment