Test date | Expiry date | Result | Odometer reading |
2017-11-08 | 2018-11-20 | ✓ Pass | 98,184 |
- Front number plate is damaged.
- Corrosion in various places, some of which is only just acceptable & some which is excessive, but outside the areas covered by the mot.
- Front flexible section of exhaust is deteriorating.
- Rear bush in o/s front suspension arm is deteriorating.
|
2017-11-06 | - | ✗ Fail | 98,183 |
- Front number plate is damaged.
- Corrosion in various places, some of which is only just acceptable & some which is excessive, but outside the areas covered by the mot.
- Front flexible section of exhaust is deteriorating.
- Rear bush in o/s front suspension arm is deteriorating.
- Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
- Front Windscreen washer provides insufficient washer liquid Wiper efficiency not checked. (8.2.3)
- Nearside Headlamp aim too high and too far to the right. Adjuster is not working. (1.8)
- Offside Seat belt anchorage prescribed area is excessively corroded Floor panel - marked. (5.2.6)
- Offside Front Suspension component mounting prescribed area is excessively corroded Chassis above suspension arm - marked. (2.4.A.3)
- Nearside Front Suspension component mounting prescribed area is excessively corroded Floor panel - marked. (2.4.A.3)
- Nearside Seat belt anchorage prescribed area is excessively corroded Floor panel - marked. (5.2.6)
- Offside Rear Subframe mounting prescribed area is excessively corroded Floor/inner sill - marked. (2.4.A.3)
- Nearside Rear Subframe mounting prescribed area is excessively corroded Floor/inner sill - marked. (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded Panel in wheelarch behind spring - marked. (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded Chassis inside wheelarch - marked. (2.4.A.3)
- Nearside Front Suspension component mounting prescribed area is excessively corroded Panel inside wheelarch behind spring - marked. (2.4.A.3)
|
2016-11-21 | 2017-11-20 | ✓ Pass | 93,179 |
- Slight corrosion nearside and offside inner sills
- Exhaust flexy broken
|
2016-11-11 | - | ✗ Fail | 93,167 |
- Slight corrosion nearside and offside inner sills
- Exhaust flexy broken
- Nearside Rear Suspension component mounting prescribed area is excessively corroded Axle mount painted white (2.4.A.3)
- Offside Rear Suspension component mounting prescribed area is excessively corroded Axle mount painted white (2.4.A.3)
|
2015-09-10 | 2016-10-06 | ✓ Pass | 87,783 |
- Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
- Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
|
2015-09-08 | - | ✗ Fail | 87,734 |
- Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
- Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
- Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
- Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
- Nearside Headlamp aim too low (1.8)
- Offside Headlamp aim too low (1.8)
- Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Registration plate lamp not working (1.1.C.1d)
|
2014-09-30 | 2015-10-06 | ✓ Pass | 79,023 |
2013-10-07 | 2014-10-06 | ✓ Pass | 72,700 |
|
2013-10-07 | - | ✗ Fail | 72,700 |
- screw o/s/r tyre
- Nearside Registration plate lamp not working (1.1.C.1d)
- Offside Registration plate lamp not working (1.1.C.1d)
|
2012-08-31 | 2013-09-28 | ✓ Pass | 63,444 |
2011-08-31 | 2012-09-28 | ✓ Pass | 50,409 |
- Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
|
2010-09-02 | 2011-09-28 | ✓ Pass | 37,468 |
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment