Test date | Expiry date | Result | Odometer reading |
2018-04-18 | 2019-04-17 | ✓ Pass | 11,273 |
- Steering headbearing has slight free play (2.2.2)
- front brake slightly spongy
- no lights fitted at time of test
|
2018-04-18 | - | ✗ Fail | 11,273 |
- Steering headbearing has slight free play (2.2.2)
- front brake slightly spongy
- no lights fitted at time of test
- Offside Front Brake lever mounting insecure (3.1.2a)
|
2018-03-29 | - | ✗ Fail | 11,273 |
- rear brake pedal has a lot of travel
- Drive chain worn to excess (6.2.1e)
- Rear Drive chain sprocket worn to excess (6.2.1e)
- Offside Rear Footrest missing (6.2.1a)
- Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)
- Stop lamp does not illuminate immediately a brake applies with front or rear brake (1.3.1a)
- Headlamp aim too low (1.6)
|
2018-02-14 | - | ✗ Fail | 11,273 |
- Lower Steering headbearing has slight free play (2.2.2)
- Front Tyre worn close to the legal limit (4.1.3(ii))
- Offside switch gear loose
- Stop lamp does not illuminate immediately a brake applies (1.3.1a)
- Offside Handlebar fractured (2.1.1b) Dangerous
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
- Drive chain excessively loose (6.2.1d)
- Headlamp aim too low (1.6)
|
2014-12-16 | 2015-12-15 | ✓ Pass | 10,846 |
2013-07-31 | 2014-07-30 | ✓ Pass | 7,968 |
2013-07-30 | - | ✗ Fail | 7,968 |
- Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)
|
2012-07-26 | 2013-07-25 | ✓ Pass | 5,743 |
- Front Wheel has a slightly distorted bead rim. (4.2.2)
- Front suspension has a slightly reduced damping effect (2.3.6c)
- Offside Front shock absorber has light misting of stanchion (2.3.3)
- Rear Exhaust mounting deteriorated. (7.1.1.c)
- Front Exhaust is leaking but is not excessively noisey (7.1.1b)
|
2012-07-26 | - | ✗ Fail | 5,743 |
- Front Wheel has a slightly distorted bead rim. (4.2.2)
- Front suspension has a slightly reduced damping effect (2.3.6c)
- Front wheel bearings have slight free play (2.3.5b)
- Offside Front shock absorber has light misting of stanchion (2.3.3)
- Rear Exhaust mounting deteriorated. (7.1.1.c)
- Front Exhaust is leaking but is not excessively noisey (7.1.1b)
- Rear shock absorber has inadequate damping effect. (2.4.A.3b)
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
- Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)
- Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) Dangerous
|
2011-06-28 | 2012-06-27 | ✓ Pass | 5,738 |
- Rear Brake master cylinder fluid level low (3.2.B1d)
- Rear mono-shock pivot worn but not excessive (2.4.B.4)
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Drive chain slightly loose (6.2.1d)
- Rear Drive chain sprocket slightly worn (6.2.1e)
- front mudguard cracked
|
2011-06-28 | - | ✗ Fail | 5,738 |
- Rear Brake master cylinder fluid level low (3.2.B1d)
- Rear mono-shock pivot worn but not excessive (2.4.B.4)
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Drive chain slightly loose (6.2.1d)
- Rear Drive chain sprocket slightly worn (6.2.1e)
- front mudguard cracked
- Headlamp aim too low (1.6)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment