Registration plate CU51GHW
Official local mnemonic: Cymru (Wales)
Postal area: Swansea
Issued: between september 2001 and february 2002
Silver Ford Ka, manufactured in 2001, first registered on 1 September 2001. Cylinder capacity: 1299cc, CO2 emissions: 154 g/km.
As of 12 May 2017 this vehicle had done 79,757 miles. Current estimated odometer reading: 93,800 miles.
✗ Untaxed Tax due: 31 March 2018
✗ No MOT Expired: 11 May 2018

MOT history

Test dateExpiry dateResultOdometer reading
2017-05-122018-05-11 Pass79,757
  • Nearside sill corroding
  • Vehicle structure has slight corrosion (6.1.B.2)
  • Front Subframe mounting prescribed area is corroded but not considered excessive o/s, n/s (2.4.A.3)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive cross member/ end chassis (2.4.A.3)
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
2017-04-26- Fail79,752
  • Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
  • Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • Rear Vehicle structure has slight corrosion cross member (6.1.B.2)
  • Offside Seat belt anchorage prescribed area is excessively corroded front/ mid sill (5.2.6)
  • Offside Front Subframe mounting prescribed area is excessively corroded underneath chassis corroded (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill end to floor (2.4.A.3)
  • Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wishbone bush (2.4.G.2)
  • Offside Front Tyre tread depth below requirements of 1.6mm inner side (4.1.E.1)
  • Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
2016-04-232017-04-22 Pass77,825
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • oil leak
  • engine sump corroding
  • Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear wishbone bush (2.4.G.2)
  • Rear Vehicle structure has slight corrosion corroding (6.1.B.2)
  • exhaust corroding front to rear
  • Offside Rear Shock absorber has a light misting of oil (2.7.3)
  • Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement axle arm bushes (2.4.G.2)
2016-04-13- Fail77,821
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • oil leak
  • engine sump corroding
  • Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear wishbone bush (2.4.G.2)
  • Rear Vehicle structure has slight corrosion corroding (6.1.B.2)
  • exhaust corroding front to rear
  • Offside Rear Shock absorber has a light misting of oil (2.7.3)
  • Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement axle arm bushes (2.4.G.2)
  • Offside Front Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
  • Offside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
  • Rear Suspension component mounting prescribed area is excessively corroded o/s/ n/s (2.4.A.3)
2015-04-142016-04-13 Pass75,867
  • Offside Front Vehicle structure has slight corrosion (6.1.A.1)
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • o/s, n/s floor to sill corroding front to rear
  • o/s/front sill corroding
2014-04-072015-04-07 Pass74,140
  • Front Vehicle structure has slight corrosion (6.1.A.1)
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • o/s/front sill corroding
2013-03-152014-04-07 Pass70,719
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
2013-03-15- Fail70,718
  • Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
  • Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
  • Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
2012-03-312013-04-07 Pass65,615
2011-04-072012-04-07 Pass62,124
2011-04-07- Fail62,124
  • Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
  • Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
2010-04-082011-04-07 Pass57,974
2010-04-08- Fail57,974
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
  • Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
2009-01-262010-01-25 Pass53,094
2009-01-26- Fail53,094
  • Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
  • Centre Obligatory mirror missing (8.1.1)
  • Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
  • Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
2007-06-132008-06-12 Pass51,804
2007-06-13- Fail51,804
  • Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Some distorsion in front brakes
  • Nearside Front brake disc excessively pitted (3.5.1h)
  • Offside Front brake disc excessively pitted (3.5.1h)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in December

  1. B16 TAJ
  2. FH56 XPE
  3. PF14 LDD
  4. SR18 HLY
  5. CK59 KWR
  6. AU12 PYB
  7. KP68 VDV
  8. LC06 OPH
  9. YJ22 CWL
  10. ML54 XBT

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV