Registration plate CV06OGR
Official local mnemonic: Cymru (Wales)
Postal area: Swansea
Issued: between march 2006 and august 2006
Silver Mazda 6, manufactured in 2006, first registered on 1 April 2006. Cylinder capacity: 1798cc, CO2 emissions: 184 g/km.
As of 13 March 2018 this vehicle had done 83,271 miles. Current estimated odometer reading: 107,700 miles.
✗ Untaxed Tax due: 1 April 2020
✗ No MOT Expired: 12 March 2020

MOT history

Test dateExpiry dateResultOdometer reading
2018-03-132019-03-12 Pass83,271
  • Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
  • Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
  • Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Front Tyre worn close to the legal limit (4.1.E.1)
  • Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
  • Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
2018-03-12- Fail83,271
  • Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
  • Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
  • Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Front Tyre worn close to the legal limit (4.1.E.1)
  • Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
  • Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Rear Exhaust has a major leak of exhaust gases (7.1.2)
  • Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
  • Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
  • Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
  • Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
  • Front Brakes imbalanced across an axle (3.7.B.5b)
2017-03-062018-03-10 Pass79,527
  • Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (2.4.A.3)
  • Vehicle structure has slight corrosion (6.1.A.1)
  • Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
2016-03-112017-03-10 Pass75,729
  • Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
  • Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
  • Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
  • Vehicle structure has slight corrosion (6.1.A.1)
2016-03-10- Fail75,696
  • Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
  • Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
  • Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)
  • Vehicle structure has slight corrosion (6.1.A.1)
  • Nearside Front coil spring broken (2.4.C.1a)
2015-03-102016-03-09 Pass70,436
  • Offside Front Tyre worn close to the legal limit (4.1.E.1)
  • Vehicle structure has slight corrosion (6.1.A.1)
2014-03-102015-03-09 Pass63,610
  • Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
  • Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
  • Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • both inner sills corroded
2014-03-10- Fail63,610
  • Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
  • Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
  • Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • both inner sills corroded
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
2013-03-082014-03-07 Pass56,755
2013-03-06- Fail56,682
  • slight damage n/s front tyre outer wall
  • Under-trays fitted obscuring some underside components
  • slight binding n/s front wheel
  • Offside Inner Front Tyre has ply or cords exposed (4.1.D.1b)
  • Nearside Front coil spring fractured (2.4.C.1a)
2012-03-062013-03-06 Pass49,954
  • Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
  • Under-trays fitted obscuring some underside components
  • slight wear n/s+o/s rear tyres
2011-03-072012-03-06 Pass43,298
  • Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
2010-03-022011-03-04 Pass35,308
  • Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
  • Nearside Rear Brake pad(s) wearing thin (3.5.1g)
  • Offside Rear Brake pad(s) wearing thin (3.5.1g)
2010-03-02- Fail35,305
  • Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
  • Nearside Rear Brake pad(s) wearing thin (3.5.1g)
  • Offside Rear Brake pad(s) wearing thin (3.5.1g)
  • Offside Front Tyre worn close to the legal limit (4.1.E.1)
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
2009-03-052010-03-04 Pass26,950
2009-03-02- Fail26,816
  • Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. KP68 VDV
  2. SL63 CKC
  3. PN59 WNG
  4. NG64 LXL
  5. B16 TAJ
  6. MT17 VCF
  7. KT73 ZHX
  8. AF03 VNA
  9. FG58 CWT
  10. MW03 VHK

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV