| Test date | Expiry date | Result | Odometer reading |
| 2017-06-12 | 2018-06-11 | ✓ Pass | 47,162 |
- Offside Front tyre mishapped
- Exhaust has a minor leak of exhaust gases (7.1.2)
- Offside front door drops slightly
|
| 2016-06-01 | 2017-05-31 | ✓ Pass | 46,050 |
- oil leak
- Nearside Rear tyre inner edge wearing
|
| 2016-06-01 | - | ✗ Fail | 46,050 |
- oil leak
- Nearside Rear tyre inner edge wearing
- Nearside Rear coil spring broken (2.4.C.1a)
- Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)
- Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)
|
| 2015-05-20 | 2016-05-19 | ✓ Pass | 43,722 |
- Rear Exhaust has a minor leak of exhaust gases (7.1.2)
- Oil leak
|
| 2015-05-19 | - | ✗ Fail | 43,722 |
- Rear Exhaust has a minor leak of exhaust gases (7.1.2)
- Oil leak
- Items removed from driver's view prior to test
- Nearside Front coil spring broken (2.4.C.1a)
|
| 2014-04-03 | 2015-04-02 | ✓ Pass | 40,983 |
- Rear coil spring corroded (2.4.C.1b)
- engine managment light on indicating fault
- front and rear brake discs worn
- exhaust flexi section worn
- exhaust middle bracket one side broken
- n/s/r tyre inner sidewall damaged
- Oil leak
|
| 2014-04-02 | - | ✗ Fail | 40,980 |
- Rear coil spring corroded (2.4.C.1b)
- engine managment light on indicating fault
- front and rear brake discs worn
- exhaust flexi section worn
- exhaust middle bracket one side broken
- n/s/r tyre inner sidewall damaged
- Oil leak
- Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Front Coil spring not correctly located (2.4.C.2)
|
| 2014-02-11 | - | ✗ Fail | 40,961 |
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear coil spring corroded (2.4.C.1b)
- Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
- front and rear brake discs worn inner face
- front brake slight imbalance
- exhaust flexi section worn
- exhaust middle section one side of the bracket has broken off
- N/S/F tyre inner sidewall damage
- Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front coil spring broken (2.4.C.1a) Dangerous
|
| 2013-01-23 | 2014-01-22 | ✓ Pass | 35,740 |
- REAR EXHAUST BACK BOX BRACKET CORRD AND NOT ATTACHED TO BACK BOX
- Front + Rear discs slightly lipped and corrd
|
| 2013-01-17 | - | ✗ Fail | 35,740 |
- REAR EXHAUST BACK BOX BRACKET CORRD AND NOT ATTACHED TO BACK BOX
- Front + Rear discs slightly lipped and corrd
- Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Nearside Front Headlamp aim too high (1.8)
- Offside Front Headlamp aim too high (1.8)
|
| 2012-06-15 | 2013-06-14 | ✓ Pass | 30,477 |
- O/S/R brake binding
- Both front brakes binding,pads at O/S appear low
|
| 2012-06-14 | - | ✗ Fail | 30,477 |
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- O/S/R brake binding
- Both front brakes binding,pads at O/S appear low
- Nearside Headlamp not working on dipped beam (1.7.5a)
- Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
|
| 2011-06-13 | 2012-06-14 | ✓ Pass | 25,070 |
| 2010-06-15 | 2011-06-14 | ✓ Pass | 19,783 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
|
| 2010-06-11 | - | ✗ Fail | 19,730 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
- Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
- Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
|