Test date | Expiry date | Result | Odometer reading |
2016-08-18 | 2017-08-17 | ✓ Pass | 151,917 |
- Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
- van has been welded and patched now every where so next year might need more welding.
|
2016-08-01 | - | ✗ Fail | 151,624 |
- Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
- Suspension component mounting prescribed area is corroded but not considered excessive van has been patched and repaired every where and patches that have been repaired are rusted again (2.4.A.3)
- Nearside Rear Registration plate lamp not working (1.1.C.1d)
- Front Windscreen washer provides insufficient washer liquid (8.2.3)
- Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Offside Front Brake pipe excessively corroded to hose (3.6.B.2c)
- Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
- Nearside Front Suspension component mounting prescribed area is excessively corroded inner step (2.4.A.3)
- Nearside Front Suspension component mounting prescribed area is excessively corroded inner chassis and wing (2.4.A.3)
- Nearside Outer Suspension component mounting prescribed area is excessively corroded sill under sliding door holed and corroded all along (2.4.A.3)
- Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill welding has come away (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of wheel chassis holed (2.4.A.3)
- Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to flooring (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis holed and corroded by load sensor (2.4.A.3)
- Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis / sill (2.4.A.3)
- Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis/sill inner panel floor mount gone (2.4.A.3)
- Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch/floor (2.4.A.3)
- Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
|
2015-07-03 | 2016-07-02 | ✓ Pass | 138,524 |
- Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
- Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
- Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)
- Nearside Front Seat belt stitching slightly frayed (5.2.2b)
- both front wheel bearings starting to sound as if they might be starting to get noise
- van has been welded in lots of places and cant really tell how well because they have been sealed and blacked
|
2015-07-03 | - | ✗ Fail | 138,524 |
- Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
- Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
- Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)
- Nearside Front Seat belt stitching slightly frayed (5.2.2b)
- both front wheel bearings starting to sound as if they might be starting to get noise
- van has been welded in lots of places and cant really tell how well because they have been sealed and blacked
- Offside Rear Stop lamp not working (1.2.1b)
|
2015-06-17 | - | ✗ Fail | 138,255 |
- Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- front wheel bearings might be starting to get noise
- Nearside Front Front position lamp(s) not working (1.1.A.3b)
- Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
- Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
- Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
- Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
|
2014-04-17 | 2015-05-01 | ✓ Pass | 123,859 |
- Offside Seat belt damaged but webbing not significantly weakened (5.2.2a)
- Slight binding on offside rear brake.
- No acceleration detected during emissions test.
|
2013-05-02 | 2014-05-01 | ✓ Pass | 117,797 |
|
2013-04-23 | - | ✗ Fail | 117,568 |
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- Nearside Stop lamp not working (1.2.1b)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
|
2012-04-04 | 2013-04-06 | ✓ Pass | 112,290 |
2011-04-07 | 2012-04-06 | ✓ Pass | 105,904 |
- Offside Front Seat belt stitching slightly frayed (5.2.2b)
|
2011-04-07 | - | ✗ Fail | 105,904 |
- Offside Front Seat belt stitching slightly frayed (5.2.2b)
- Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Rear Stop lamp not working (1.2.1b) Dangerous
- Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
|
2010-02-09 | 2011-02-08 | ✓ Pass | 100,913 |
2009-11-18 | - | ✗ Fail | 100,795 |
- Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- lower engine stabiliser mounting fractured
- Offside Front position lamp(s) not working (1.1.A.3b)
- Drivers seat insecure (6.2.A.1)
- Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
- Offside front brake binding (3.7.B.1)
- Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)
|
2008-11-14 | 2009-11-21 | ✓ Pass | 92,733 |
|
2008-11-13 | - | ✗ Fail | 92,733 |
- Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
- drivers seat insecure
- Offside Front position lamp(s) not working (1.1.A.3b)
- Registration plate lamp not working (1.1.C.1d)
- Nearside Rear Shock absorber has negligible damping effect (2.7.5)
|
2007-11-14 | 2008-11-21 | ✓ Pass | 82,367 |
2007-11-14 | - | ✗ Fail | 82,367 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
- Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Front registration plate deteriorated (6.3.1d)
- Offside Front position lamp(s) not working (1.1.A.3b)
- Registration plate lamp not working (1.1.5c)
- Brake pedal anti-slip provision worn smooth (3.3.A.1b)
|
2006-11-10 | 2007-11-21 | ✓ Pass | 72,201 |
2006-11-09 | - | ✗ Fail | 72,201 |
- Nearside Brake pad(s) wearing thin (3.5.1g)
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- Engine/gearbox mounting(s) defective
- Nail in offside rear tyre
- Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
- Rear registration plate character(s) likely to be misread (6.3.4b)
- Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
2005-11-21 | 2006-11-21 | ✓ Pass | 63,379 |