| Test date | Expiry date | Result | Odometer reading |
| 2014-07-25 | 2015-07-25 | ✓ Pass | 47,608 |
- colour change now black not yellow
|
| 2014-07-25 | - | ✗ Fail | 47,608 |
- colour change now black not yellow
- Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)
- Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)
- Rear Tyre tread not clearly visible (4.1.3(i))
|
| 2013-07-26 | 2014-07-25 | ✓ Pass | 44,675 |
- Rear Tyre worn close to the legal limit (4.1.3(i))
- Front Clutch lever shortened. (6.2.1g)
|
| 2012-06-01 | 2013-06-02 | ✓ Pass | 44,587 |
- Rear Tyre worn close to the legal limit (4.1.3(i))
- Front Clutch lever shortened. (6.2.1g)
|
| 2011-06-03 | 2012-06-02 | ✓ Pass | 41,132 |
- Front Tyre worn close to the legal limit (4.1.3(i))
|
| 2011-05-31 | - | ✗ Fail | 41,132 |
- Front Tyre worn close to the legal limit (4.1.3(i))
- Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))
- Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)
- Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)
|
| 2010-05-28 | 2011-05-27 | ✓ Pass | 37,007 |
- Front Brake pad(s) close to minimum limit (3.2.A1f(i))
- Front Tyre worn close to the legal limit (4.1.3(ii))
|
| 2010-05-27 | - | ✗ Fail | 37,006 |
- Front Brake pad(s) close to minimum limit (3.2.A1f(i))
- Front Tyre worn close to the legal limit (4.1.3(ii))
- Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))
- Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)
|
| 2009-12-29 | 2010-12-28 | ✓ Pass | 35,615 |
| 2009-11-27 | - | ✗ Fail | 35,613 |
- FRONT BRAKE PADS LOW
- Front Headlamp insecure (1.2.3b)
- Front Headlamp aim too low (1.6)
- Front Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)
- Front Front suspension has inadequate damping effect. (2.3.6c)
|
| 2005-12-19 | 2006-12-18 | ✓ Pass | 32,761 |
| 2005-12-17 | - | ✗ Fail | 32,730 |
- IGNITION SWITCH IS LOOSE
- Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)
- Front Hydraulic brake control creeps under load. (3.1.4a)
- Front Hydraulic brake control feels spongy (3.1.4a)
- Front Brake lever has inadequate reserve travel (3.1.3b)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment