Test date | Expiry date | Result | Odometer reading |
2017-08-16 | 2018-08-15 | ✓ Pass | 24,249 |
2017-08-16 | - | ✗ Fail | 24,249 |
- Headlamp at least one does not illuminate on main beam (1.2.2a(ii))
- Rear position lamp deteriorated and function impaired not working (1.1.1b)
- Stop lamp damaged and function impaired not working (1.3.3a)
|
2016-07-25 | 2017-08-08 | ✓ Pass | 18,805 |
2016-07-25 | - | ✗ Fail | 18,805 |
- Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)
|
2016-07-21 | - | ✗ Fail | 18,792 |
- Drive chain worn to excess (6.2.1e)
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
|
2015-08-08 | 2016-08-08 | ✓ Pass | 17,602 |
- Front Brake disc(s) has slight run out (3.2.A1m)
|
2015-08-08 | - | ✗ Fail | 17,602 |
- Front Brake disc(s) has slight run out (3.2.A1m)
- Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))
|
2014-08-09 | 2015-08-08 | ✓ Pass | 15,017 |
- Front Fairings insecure but not likely to impede the steering (2.1.2e)
|
2013-08-09 | 2014-08-08 | ✓ Pass | 9,945 |
2013-08-05 | - | ✗ Fail | 9,941 |
- Exhaust is leaking and excessively noisey (7.1.1b)
- Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))
- Headlamp insecure (1.2.3b)
- Stop lamp does not illuminate immediately a brake applies (1.3.1a)
- Front Roller brake test indicates a binding brake (3.3.A1a)
- Front Wheel has an excessively distorted bead rim. (4.2.2)
- Headlamp aim not tested (1.6)
|
2012-04-20 | 2013-04-19 | ✓ Pass | 7,972 |
- Front Wheel has a slightly distorted bead rim. (4.2.2)
|
2011-04-08 | 2012-04-07 | ✓ Pass | 7,721 |
- Front Wheel has a slightly distorted bead rim. (4.2.2)
|
2011-03-29 | - | ✗ Fail | 7,713 |
- Front Wheel has a slightly distorted bead rim. (4.2.2)
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
|
2009-10-22 | 2010-10-21 | ✓ Pass | 5,261 |
- Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)
- Steering movement slightly 'notchy' (2.2.1b)
|
2009-10-13 | - | ✗ Fail | 5,257 |
- Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)
- Brake pedal is bent but brake can still be readily applied (3.1.3c)
- Brake lever is bent but brake can still be readily applied (3.1.3c)
- Both tyres found to be almost flat. Inflated to 29/33 psi.
- Offside dip beam not working.
- Headlamp aim too low (1.6)
- Front suspension has inadequate damping effect. (2.3.6c)
- Nearside Front suspension spring fractured (2.2.1b(I))
- Nearside Front suspension spring incomplete (2.2.1b(I))
- Front suspension assembly excessive wear or free play in a front suspension component (2.3.4) Dangerous
- Rear Roller brake test indicates a binding brake (3.3.A1a)
- Brake pedal has inadequate reserve travel (3.1.3b)
- Drive chain excessively tight (6.2.1d)
- Steering movement excessively 'notchy' with the wheel raised (2.2.1b)
|
2008-06-17 | 2009-06-16 | ✓ Pass | 2,794 |
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment