| Test date | Expiry date | Result | Odometer reading |
|---|
| 2017-10-31 | 2018-10-30 | ✓ Pass | 128,391 |
- Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Central Fluid suspension unit supply pipe corroded but not seriously weakened Front to rear pipe (2.4.D.3)
- Nearside Front Tyre worn close to the legal limit wear to inner edge (4.1.E.1)
- Offside Front Tyre worn close to the legal limit wear to inner edge (4.1.E.1)
|
| 2017-06-01 | - | ✗ Fail | 128,051 |
- Offside Front wing starting to corrode
- FUEL TANK REPAIRED BUT NOT LEAKING
- Fuel Pipe/s corroded ()
- Parking brake: efficiency below requirements (3.7.B.7)
- Offside Rear Stop lamp not working (1.2.1b)
- Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
- Offside Rear Rear fog lamp not working (1.3.2b)
- Nearside Front Body has a sharp edge caused by corrosion wing (6.1.C.1)
- Battery insecure (1.9.1)
- Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
- rear parking brake recording little or no effort (3.7.B.6a)
- Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WING (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING (2.4.A.3)
- Nearside Front Suspension component mounting prescribed area is inadequately repaired INNER WING REPAIR SECTIONS NOT FULLY WELDED (2.4.A.3)
- Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
- Nearside Rear Suspension has inadequate clearance with the bump stop SHOCK ABSORBER ON BUMP STOP (2.4.A.1a)
- Offside Rear Suspension has inadequate clearance with the bump stop SHOCK ABSORBER ON BUMP STOP (2.4.A.1a)
|
| 2016-04-05 | 2017-04-04 | ✓ Pass | 128,008 |
- Large hole in OSF inner wing at front
- Rear Sub-frame has slight play in a pin/bush Both front bushes on rear subframe worn (2.4.G.2)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
|
| 2016-03-18 | - | ✗ Fail | 128,008 |
- Large hole in OSF inner wing at front
- Rear Sub-frame has slight play in a pin/bush Both front bushes on rear subframe worn (2.4.G.2)
- Offside Front Brake hose slightly deteriorated (3.6.B.4d)
- Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
- Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
- Rear fog lamp not working (1.3.2b)
- Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing (2.4.A.3)
- Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Rear Fluid suspension unit leaking (2.4.D.2)
|
| 2014-12-23 | 2015-12-22 | ✓ Pass | 124,022 |
- Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
- Front Brake pipe slightly corroded (3.6.B.2c)
- Front Fluid suspension unit interconnecting pipe corroded but not seriously weakened (2.4.D.3)
- slight corrosion to both front inner wings
- front exhaust bracket broken
- nearside front tyre worn on inner edge
- Nail in nearside front tyre
- Oil leak
|
| 2014-08-11 | - | ✗ Fail | 124,008 |
- Front Brake pipe slightly corroded (3.6.B.2c)
- Nearside Front Brake pipe slightly corroded (3.6.B.2c)
- Offside Front Brake pipe slightly corroded (3.6.B.2c)
- Fluid suspension unit interconnecting pipe corroded but not seriously weakened (2.4.D.3)
- fuel tank repaired
- both front inner wings corroded
- front exhaust bracket broken
- nearside front tyre worn on inner edge
- Nail in nearside front tyre
- Oil leak
- Front Brakes imbalanced across an axle (3.7.B.5b)
- Nearside Registration plate lamp not working (1.1.C.1d)
- Offside Registration plate lamp not working (1.1.C.1d)
- Battery insecure (1.9.1)
- Offside Rear Fluid suspension unit leaking (2.4.D.2)
- Parking brake: efficiency below requirements (3.7.B.7)
|
| 2013-09-12 | 2014-09-11 | ✓ Pass | 123,963 |
- Brake pipe slightly corroded (3.6.B.2c)
- Fluid suspension unit supply pipe corroded but not seriously weakened (2.4.D.3)
|
| 2012-07-09 | 2013-07-08 | ✓ Pass | 118,763 |
- suspension pipes showing signs of corrosion
|
| 2012-07-02 | - | ✗ Fail | 118,758 |
- Offside Front Brake pipe slightly corroded (3.6.B.2c)
- Nearside Front Brake pipe slightly corroded (3.6.B.2c)
- Rear Exhaust has a minor leak of exhaust gases (7.1.2)
- N/S Freont tyre wearing on inner edge
- Rear Brake pipe excessively corroded (3.6.B.2c)
- Offside Front wheel bearing has excessive play (2.5.A.3c)
- Nearside Front wheel bearing has excessive play (2.5.A.3c)
- Offside Rear position lamp(s) not working (1.1.A.3b)
- Offside Rear Direction indicator not working (1.4.A.2c)
- Offside Stop lamp not working (1.2.1b)
- Rear fog lamp not working (1.3.2b)
|
| 2010-08-31 | 2011-08-30 | ✓ Pass | 118,755 |
| 2010-08-31 | - | ✗ Fail | 118,755 |
- Nearside Stop lamp not working (1.2.1b)
|
| 2009-11-19 | 2010-11-22 | ✓ Pass | 110,586 |
| 2009-11-17 | - | ✗ Fail | 110,586 |
- Front Brake pipe slightly corroded (3.6.B.2c)
- Rear registration plate character(s) likely to be misread (6.3.4b)
- Offside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2008-11-21 | 2009-11-22 | ✓ Pass | 98,919 |
| 2008-11-21 | - | ✗ Fail | 98,919 |
- Nearside Brake pipe slightly corroded (3.6.B.2c)
- Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
- Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
- Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
- Parking brake: efficiency below requirements (3.7.B.7)
|
| 2007-11-20 | 2008-11-22 | ✓ Pass | 90,414 |
| 2007-11-19 | - | ✗ Fail | 90,414 |
- Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
- Offside Rear Brake pipe excessively corroded (3.6.B.2c)
- Exhaust has part of the system excessively deteriorated (7.1.1a)
- Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2006-11-21 | 2007-11-22 | ✓ Pass | 84,280 |
| 2006-11-20 | - | ✗ Fail | 84,279 |
- Offside Front coil spring fractured (2.4.C.1a)
- Offside Rear Stop lamp not working (1.2.1b)
- Centre Brake pipe excessively corroded (3.6.B.2c)
|
| 2005-11-23 | 2006-11-22 | ✓ Pass | 78,815 |
| 2005-11-23 | - | ✗ Fail | 78,814 |
- Nearside Front Front position lamp(s) not working (1.1.A.3b)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
Blue Mercedes 230 te, manufactured in 1992, first registered on 1 June 1992. Cylinder capacity: 2299cc.