Registration plate KC06VVT
Official local mnemonic: Milton Keynes
Postal area: Luton
Issued: between march 2006 and august 2006
Blue Mazda Mx-5, manufactured in 2006, first registered on 1 June 2006. Cylinder capacity: 1798cc, CO2 emissions: 174 g/km.
As of 24 May 2023 this vehicle had done 117,780 miles. Current estimated odometer reading: 123,500 miles.
✗ Untaxed Tax due: 1 March 2021
✗ No MOT Expired: 2 December 2020

MOT history

Test dateExpiry dateResultOdometer reading
2023-05-242024-05-23 Pass117,780
  • Genral corrosion to under vehicle
  • Nearside rear inner suspension component mounting repair covered in underseal prescribed area corroded, not considered excessive (5.3.6 (a) (i))
  • Offside rear inner suspension component mounting repair covered in underseal prescribed area corroded, not considered excessive (5.3.6 (a) (i))
  • Rear tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
2023-05-24- Fail117,780
  • Genral corrosion to under vehicle
  • Nearside rear inner suspension component mounting repair covered in underseal prescribed area corroded, not considered excessive (5.3.6 (a) (i))
  • Offside rear inner suspension component mounting repair covered in underseal prescribed area corroded, not considered excessive (5.3.6 (a) (i))
  • Rear tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
  • Offside front service brake excessively binding (1.2.1 (f))
  • Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))
2023-04-06- Fail117,659
  • Nearside rear registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
  • Nearside rear tyre worn close to legal limit/worn on edge (5.2.3 (e))
  • Offside rear tyre worn close to legal limit/worn on edge (5.2.3 (e))
  • Nearside rear integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill/wheel arch (6.1.1 (c) (i))
  • Nearside rear integral body structure has excessive corrosion which adversely affects braking or steering inner cill/floor (6.1.1 (c) (ii))
  • Nearside rear stop lamp(s) not working (4.3.1 (a) (ii))
  • Offside front service brake excessively binding (1.2.1 (f))
  • Offside rear integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill (6.1.1 (c) (i))
2022-03-292023-03-28 Pass113,429
  • Under vehicle corrosion
2022-03-09- Fail113,423
  • Rear body ,subframe and suspension corrosion
  • Nearside rear integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill next to rear axel mounting (6.1.1 (c) (i))
  • Offside rear integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill next to rear axel mounting (6.1.1 (c) (i))
2021-01-252022-01-24 Pass108,772
  • Rear body and suspension corrosion
2021-01-18- Fail108,712
  • Rear body and suspension corrosion
  • Vehicle structure has excessive corrosion which adversely affects braking or steering osr sill to floor (6.1.1 (c) (ii))
2019-12-032020-12-02 Pass105,188
  • Both rear brake discs heavily corroded and pitted
  • Rear brake pad(s) wearing thin (1.1.13 (a) (ii))
  • Rear sub frame and suspension arms corroded
2018-12-032019-12-02 Pass102,807
2018-11-29- Fail102,807
  • Front brakes imbalanced requirements only just met. it would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))
  • Offside front position lamp not working (4.2.1 (a))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))
2018-10-29- Fail102,798
  • Rear brake disc worn, pitted or scored, but not seriously weakened both corroded (1.1.14 (a) (ii))
  • Rear brake pad(s) wearing thin (1.1.13 (a) (ii))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
2017-10-252018-10-25 Pass94,993
2016-10-262017-10-25 Pass85,809
2015-10-232016-10-22 Pass75,525
  • Corrosion/wear to inner faces of all four brake discs
2015-10-21- Fail75,525
  • Corrosion/wear to inner faces of all four brake discs
  • Exhaust has a major leak of exhaust gases (7.1.2)
2014-09-022015-09-01 Pass66,764
2014-02-102015-02-13 Pass62,520
  • Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
2013-02-122014-02-13 Pass53,356
2012-02-142013-02-13 Pass41,332
2012-02-14- Fail41,332
  • Offside rear anti-roll bar linkage has excessive play in a pin/bush (2.4.g.2)
2011-06-242012-06-30 Pass34,447
  • Front brake pad(s) wearing thin (3.5.1g)
  • Offside rear anti-roll bar link rod has slight play in ball joint.
2010-06-252011-06-30 Pass26,058
2009-07-012010-06-30 Pass17,708
2009-07-01- Fail17,708
  • Front registration plate character(s) incorrectly spaced (6.3.4a)
  • Rear registration plate character(s) incorrectly spaced (6.3.4a)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. LC06 OPH
  2. KP68 VDV
  3. FN66 JYU
  4. DK55 XAT
  5. KT73 ZHX
  6. RF12 HKU
  7. KV59 YWN
  8. MLP 2010
  9. B16 TAJ
  10. WG02 NFE

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV