| Test date | Expiry date | Result | Odometer reading |
|---|
| 2014-07-26 | 2015-07-25 | ✓ Pass | 24,441 |
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Drive chain worn but not considered excessive (6.2.1e)
- Rear Brake linkage clevis joint slightly worn (3.2.A1d)
|
| 2014-07-18 | - | ✗ Fail | 24,427 |
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Rear Drive chain worn but not considered excessive (6.2.1e)
- Rear Brake pedal pivots slightly worn (3.1.3a)
- Nearside Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)
- Front Headlamp aim headlamp damaged and function impaired (1.2.3a)
- Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)
- Rear Brake pedal has inadequate reserve travel (3.1.3b)
- Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)
- Front An item not tested (Manual)
- Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)
|
| 2012-05-15 | 2013-05-15 | ✓ Pass | 23,230 |
- Front Brake pad(s) close to minimum limit (3.2A1f(ii))
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Rear wheel bearings have slight free play (2.4.A.2c)
|
| 2012-05-08 | - | ✗ Fail | 23,187 |
- Front Brake pad(s) close to minimum limit (3.2A1f(ii))
- Rear Brake pad(s) close to minimum limit (3.2.A1f(i))
- Rear wheel bearings have slight free play (2.4.A.2c)
- Headlamp aim too low (1.6)
- Front Front wheel bearings have excessive free play (2.3.5b)
- Nearside Handlebar mounting clamp loose (2.1.1a)
|
| 2011-05-07 | 2012-05-15 | ✓ Pass | 19,235 |
| 2011-05-06 | - | ✗ Fail | 19,233 |
- Front Front position lamp does not illuminate immediately when switched on (1.1.3a)
- Rear Drive chain worn to excess (6.2.1e)
- Front Headlamp aim too low (1.6)
|
| 2010-04-29 | 2011-05-15 | ✓ Pass | 14,221 |
- condition of both rear tyres
- security of n/s/f indictor
- rear foot pegs missing
|
| 2009-05-16 | 2010-05-15 | ✓ Pass | 11,955 |
| 2009-05-14 | - | ✗ Fail | 11,952 |
- Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)
|
| 2008-01-21 | - | ✗ Fail | 11,316 |
- rear tyre tread on limit
- o/s front fork misting in oil
- front o/s braske pad getting low
- Offside Rear Footrest insecure (6.2.1a)
- Headlamp aim beam image kick up to the offside (1.6)
|
| 2008-01-21 | 2009-01-20 | ✓ Pass | 11,316 |
- rear tyre tread on limit
- o/s front fork misting in oil
- front o/s braske pad getting low
|
| 2007-01-19 | 2008-01-18 | ✓ Pass | 7,497 |
| 2007-01-09 | - | ✗ Fail | 7,497 |
- Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)
- Offside Front shock absorber seal failed and leaking oil (2.3.3)
- Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))
- Headlamp aim beam image kick up to the offside (1.6)
- Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Official local mnemonic: London