Registration plate MK05NDO
Official local mnemonic: Manchester and Merseyside
Postal area: Manchester
Issued: between march 2005 and august 2005
Silver Ford Ka, manufactured in 2005, first registered on 1 June 2005. Cylinder capacity: 1299cc, CO2 emissions: 141 g/km.
As of 14 May 2018 this vehicle had done 27,367 miles. Current estimated odometer reading: 41,500 miles.
✗ Untaxed Tax due: 1 June 2019
✗ No MOT Expired: 22 May 2019

MOT history

Test dateExpiry dateResultOdometer reading
2018-05-142019-05-22✓ Pass27,367
  • Brake actuating linkage mounting prescribed area is corroded but not considered excessive bulk head (3.3.A.2)
  • Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulk head (3.6.C.3)
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive front and rear mounts (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive front and rear mounts (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer/under sill (2.4.A.3)
  • Nearside Rear Suspension component mounting prescribed area repaired, but not inappropriately inner wheel arch (2.4.A.3)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer/under sill (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer/under sill (2.4.A.3)
  • Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wheel arch (5.2.6)
  • Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear bush (2.4.G.2)
  • Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear bush (2.4.G.2)
2018-05-10-✗ Fail27,347
  • Brake actuating linkage mounting prescribed area is corroded but not considered excessive bulk head (3.3.A.2)
  • Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulk head (3.6.C.3)
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive front and rear mounts (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive front and rear mounts (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer/under sill (2.4.A.3)
  • Nearside Rear Suspension component mounting prescribed area repaired, but not inappropriately inner wheel arch (2.4.A.3)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer/under sill (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer/under sill (2.4.A.3)
  • Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wheel arch (5.2.6)
  • Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear bush (2.4.G.2)
  • Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear bush (2.4.G.2)
  • Offside Headlamp not working on dipped beam (1.7.5a)
2017-05-232018-05-22✓ Pass25,744
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer sill under sealed (2.4.A.3)
  • Subframe mounting prescribed area is corroded but not considered excessive inner arch mounts for sub frame and chassis (2.4.A.3)
2017-05-22-✗ Fail25,711
  • Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive bulkhead (3.1.9)
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer sill under sealed (2.4.A.3)
  • Subframe mounting prescribed area is corroded but not considered excessive inner arch mounts for sub frame and chassis (2.4.A.3)
2016-06-242017-06-23✓ Pass25,120
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer sill under sealed (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch close to excess (2.4.A.3)
2016-06-18-✗ Fail25,106
  • Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately outer sill under sealed (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch close to excess (2.4.A.3)
2015-06-192016-06-18✓ Pass24,500
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
2015-06-13-✗ Fail24,477
  • Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
2014-06-142015-06-14✓ Pass23,990
  • nearside fornt and offside front inner wheelarchs corroded
2013-06-142014-06-14✓ Pass23,034
2013-06-14-✗ Fail23,034
  • Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
  • nearside front brake binding slightly
2012-06-132013-06-14✓ Pass22,134
  • Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
2011-06-072012-06-14✓ Pass21,101
2010-06-092011-06-14✓ Pass19,774
2009-06-112010-06-14✓ Pass16,270
  • n/s/f tyre perishing and cracking
  • o/s/f tyre perishing and cracking
  • n/s/r tyre perishing and cracking
  • o/s/r tyre perishing and cracking
2008-06-112009-06-14✓ Pass13,107

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. EN07 RUA
  2. SD64 XFB
  3. CV26 NXC
  4. BN60 PYT
  5. O00 OOO
  6. EG04 PKK
  7. OO15 LAX
  8. W44 RMB
  9. LP63 OUC
  10. BN14 LHP

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV