| Test date | Expiry date | Result | Odometer reading |
| 2017-04-11 | 2018-04-10 | ✓ Pass | 75,585 |
- Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
- engine bay covers fitted
- under body covers fitted
|
| 2017-03-06 | - | ✗ Fail | 75,577 |
- Rear Brake pipe slightly corroded (3.6.B.2c)
- Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
- plastic side skirts fitted obscuring some outer sil components
- Offside Rear Lower Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear outer (2.4.G.2)
- Nearside Rear Lower Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear outer (2.4.G.2)
- Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
- Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
- Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sil (5.2.6)
- Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sil (5.2.6)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sil/floor/chassis (2.4.A.3)
- Offside Rear Registration plate lamp not working (1.1.C.1d)
|
| 2016-04-11 | 2017-04-10 | ✓ Pass | 73,166 |
| 2016-04-08 | - | ✗ Fail | 73,162 |
- Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive IN FRONT OF REAR SUB FRAME LOWER MOUNTING (2.4.A.3)
- Nearside Rear Outer Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt TRACK AJUSTER (2.4.G.2)
- Offside Rear Outer Tie bar/rod ball joint dust cover insecure so that it no longer prevents the ingress of dirt TRACK AJUSTER (2.4.G.2)
- Nearside Rear Lower Subframe mounting prescribed area is excessively corroded IN FRONT OF REAR SUBFRAME FRONT LOWER MOUNTING (2.4.A.3)
|
| 2016-03-04 | - | ✗ Fail | 72,948 |
- Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement arm to shock absorber mount. (2.4.G.2)
- Offside Rear brake pipe to its flexi hose is corroding.
- engine oil requires top up.
- Offside Rear Direction indicator incorrect colour showing white light. (1.4.A.2f)
- Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement arm to shock absorber mount. (2.4.G.2)
- Nearside Outer Track rod end loose to its steering rack rod. (2.2.B.1d)
|
| 2015-03-16 | 2016-03-17 | ✓ Pass | 68,260 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- both rear discs pitted
|
| 2014-03-17 | 2015-03-17 | ✓ Pass | 62,031 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
|
| 2013-03-18 | 2014-03-17 | ✓ Pass | 58,995 |
| 2012-02-09 | 2013-02-08 | ✓ Pass | 52,277 |
| 2012-02-07 | - | ✗ Fail | 52,264 |
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2011-01-27 | 2012-02-07 | ✓ Pass | 49,296 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- Nearside Rear coil spring corroded (2.4.C.1b)
- Offside Rear coil spring corroded (2.4.C.1b)
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- NSF Fog lamp inop
|
| 2011-01-27 | - | ✗ Fail | 49,296 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- Nearside Rear coil spring corroded (2.4.C.1b)
- Offside Rear coil spring corroded (2.4.C.1b)
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- NSF Fog lamp inop
- Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
- Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
|
| 2010-01-28 | 2011-02-07 | ✓ Pass | 48,014 |
| 2009-02-04 | 2010-02-07 | ✓ Pass | 46,152 |
| 2008-02-08 | 2009-02-07 | ✓ Pass | 43,090 |
| 2008-02-05 | - | ✗ Fail | 42,964 |
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2007-04-12 | 2008-04-11 | ✓ Pass | 34,399 |
| 2006-09-30 | 2007-09-30 | ✓ Pass | 31,171 |
| 2005-09-16 | 2006-09-30 | ✓ Pass | 23,948 |
| 2005-09-16 | - | ✗ Fail | 23,948 |
- Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.B3)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment