Registration plate OY52WNH
Official local mnemonic: Oxford
Postal area: Oxford
Issued: between september 2002 and february 2003
Silver Mazda 323, manufactured in 2002, first registered on 1 September 2002. Cylinder capacity: 1324cc, CO2 emissions: 179 g/km.
As of 16 June 2017 this vehicle had done 105,643 miles. Current estimated odometer reading: 158,400 miles.
✗ Untaxed Tax due: 4 June 2018
✗ No MOT Expired: 26 June 2018

MOT history

Test dateExpiry dateResultOdometer reading
2017-06-162018-06-26 Pass105,643
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive N/S & O/S (2.4.A.3)
  • Front Suspension component mounting prescribed area is corroded but not considered excessive N/S & O/S (2.4.A.3)
  • Seat belt anchorage prescribed area is corroded but not considered excessive N/S & O/S (5.2.6)
  • Rear Brake hose slightly deteriorated N/S & O/S (3.6.B.4d)
2017-06-15- Fail105,635
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive N/S & O/S (2.4.A.3)
  • Front Suspension component mounting prescribed area is corroded but not considered excessive N/S & O/S (2.4.A.3)
  • Seat belt anchorage prescribed area is corroded but not considered excessive N/S & O/S (5.2.6)
  • Rear Brake hose slightly deteriorated N/S & O/S (3.6.B.4d)
  • Rear Suspension component mounting prescribed area is excessively corroded inner sills, N/S & O/S (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
  • Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)
2016-06-102017-06-26 Pass98,447
  • rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
  • Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
  • Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
  • Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
  • Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • nearside inner sill corroded
  • offside inner sill corroded
2016-06-09- Fail98,439
  • rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
  • Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
  • Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
  • Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
  • Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
  • Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • nearside inner sill corroded
  • offside inner sill corroded
  • Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
  • Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
2015-06-192016-06-26 Pass92,373
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
2015-06-18- Fail92,373
  • Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
  • Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
2014-06-202015-06-26 Pass86,176
2014-06-20- Fail86,171
  • Parking brake lever has no reserve travel (3.1.6b)
  • Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
  • Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
2013-06-272014-06-26 Pass80,767
  • Parking brake lever has little reserve travel (3.1.6b)
2013-06-22- Fail80,763
  • Parking brake lever has little reserve travel (3.1.6b)
  • Registration plate lamp not working (1.1.C.1d)
  • Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
  • Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
2012-06-222013-06-22 Pass75,485
2012-06-22- Fail75,480
  • Offside Registration plate lamp not working (1.1.C.1d)
  • Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
  • Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
2011-06-142012-06-22 Pass70,671
  • Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
  • Offside Rear Tyre worn close to the legal limit (4.1.E.1)
  • Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
  • Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
  • rear suspension prescribed areas have heavy surface corrosion
2010-06-232011-06-22 Pass65,972
  • Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
  • Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
  • Exhaust has part of the system slightly deteriorated (7.1.1a)
2010-06-23- Fail482,387
  • Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
  • Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
  • Exhaust has part of the system slightly deteriorated (7.1.1a)
  • Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
  • Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
2009-06-182010-06-17 Pass61,167
  • offside front tyre close to limit
  • rear chassis rusty
  • inner sills rusty
2008-01-092009-01-08 Pass53,947
2007-01-052008-01-04 Pass48,238
  • brake disc slightly pitted (3.5.1h)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. LC06 OPH
  2. KP68 VDV
  3. FN66 JYU
  4. DK55 XAT
  5. KT73 ZHX
  6. RF12 HKU
  7. KV59 YWN
  8. MLP 2010
  9. B16 TAJ
  10. WG02 NFE

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV