| Test date | Expiry date | Result | Odometer reading |
|---|
| 2018-05-24 | 2019-05-23 | ✓ Pass | 3,799 |
| 2018-05-24 | - | ✗ Fail | 3,799 |
| 2017-06-19 | 2018-06-27 | ✓ Pass | 800 |
- Steering headbearing has slight free play (2.2.2)
- Rear suspension bush has slight free play (2.4.A2a(i))
|
| 2016-06-28 | 2017-06-27 | ✓ Pass | 223 |
- Front Front suspension has a slightly reduced damping effect (2.3.6c)
- Rear Drive chain sprocket slightly worn (6.2.1e)
|
| 2016-06-28 | - | ✗ Fail | 223 |
- Front Front suspension has a slightly reduced damping effect (2.3.6c)
- Rear Drive chain sprocket slightly worn (6.2.1e)
- Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)
- Offside Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)
|
| 2015-06-12 | 2016-06-11 | ✓ Pass | 223 |
- Centre Front Wheel alignment slightly misaligned. (2.5.1)
|
| 2015-06-04 | - | ✗ Fail | 223 |
- Centre Front Wheel alignment slightly misaligned. (2.5.1)
- Outer Front Tyre worn close to the legal limit (4.1.3(ii))
- Centre Rear Lower Rear suspension bush has slight free play (2.4.A2a(i))
- Centre Front Headlamp aim too high (1.6)
- Nearside Front Upper Handlebar deformed (2.1.1b)
- Offside Front Upper Handlebar deformed (2.1.1b)
- Outer Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))
- Centre Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)
- Centre Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)
|
| 2014-01-31 | 2015-01-30 | ✓ Pass | 223 |
- Front Brake pad(s) close to minimum limit (3.2.A1f(i))
- Drive chain slightly loose (6.2.1d)
- Drive chain worn but not considered excessive (6.2.1e)
- Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)
|
| 2012-06-26 | - | ✗ Fail | 223 |
- Front Tyre worn close to the legal limit (4.1.3(ii))
- Rear shock absorber has a light misting (2.4.A.1c)
- Headlamp aim too high (1.6)
- Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)
- Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)
- Front Brake caliper(s) securing bolt(s) missing (3.2.A1j) Dangerous
- Rear Floor brake test indicates a binding brake (3.3.C2c)
- Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)
- Nearside Front suspension assembly component excessively bent (2.3.1)
- Offside Front suspension assembly component excessively bent (2.3.1)
- Rear wheel bearings have excessive free play (2.4.A.2c)
- Rear reflector on motorcycle missing (1.4.1)
- Nearside Fairings insecure and likely to impede the steering (2.1.2e)
|
| 2011-05-31 | 2012-05-30 | ✓ Pass | 223 |
| 2009-10-30 | 2010-10-29 | ✓ Pass | 223 |
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Official local mnemonic: Oxford