| Test date | Expiry date | Result | Odometer reading |
|---|
| 2017-10-26 | 2018-10-27 | ✓ Pass | 168,918 |
- rear brake fluctuating, but not excessively (3.7.B.3)
- coil spring corroded both rear (2.4.C.1b)
- Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
- Subframe mounting prescribed area is corroded but not considered excessive rear chassis (2.4.A.3)
- Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
|
| 2017-10-25 | - | ✗ Fail | 168,918 |
- rear brake fluctuating, but not excessively (3.7.B.3)
- coil spring corroded both rear (2.4.C.1b)
- Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
- Subframe mounting prescribed area is corroded but not considered excessive rear chassis (2.4.A.3)
- Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Central Stop lamp not working (1.2.1b)
- Rear registration plate faded (6.3.1d)
|
| 2016-10-20 | 2017-10-27 | ✓ Pass | 168,792 |
- coil spring corroded both rear (2.4.C.1b)
- Subframe mounting prescribed area is corroded but not considered excessive both rear (2.4.A.3)
- Suspension component mounting prescribed area is distorted but not considered excessive both rear inner sill ends (2.4.A.3)
- Suspension arm corroded but not seriously weakened both rear top and bottom (2.4.G.1)
- Oil leak ()
|
| 2016-10-20 | - | ✗ Fail | 168,792 |
- coil spring corroded both rear (2.4.C.1b)
- Subframe mounting prescribed area is corroded but not considered excessive both rear (2.4.A.3)
- Suspension component mounting prescribed area is distorted but not considered excessive both rear inner sill ends (2.4.A.3)
- Suspension arm corroded but not seriously weakened both rear top and bottom (2.4.G.1)
- Oil leak ()
- Nearside Front Body has a sharp edge caused by corrosion wing (6.1.C.1)
- Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
|
| 2015-10-22 | 2016-10-27 | ✓ Pass | 168,435 |
- Nearside Front Brake pipe slightly corroded (3.6.B.2c)
- Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
- Rear coil spring corroded both sides (2.4.C.1b)
- Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)
- Rear Subframe mounting prescribed area is corroded but not considered excessive both sill ends (2.4.A.3)
- Rear Suspension arm corroded but not seriously weakened both sides upper and lower (2.4.G.1)
- engine oil leak
|
| 2015-10-22 | - | ✗ Fail | 168,435 |
- Nearside Front Brake pipe slightly corroded (3.6.B.2c)
- Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
- Rear coil spring corroded both sides (2.4.C.1b)
- Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)
- Rear Subframe mounting prescribed area is corroded but not considered excessive both sill ends (2.4.A.3)
- Rear Suspension arm corroded but not seriously weakened both sides upper and lower (2.4.G.1)
- engine oil leak
- Offside Front Brake pipe excessively corroded (3.6.B.2c)
|
| 2014-10-22 | 2015-10-27 | ✓ Pass | 167,316 |
- Nearside Outer Front Brake pipe slightly corroded (3.6.B.2c)
- Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)
- Rear coil spring corroded (2.4.C.1b)
- nearside and offside rear chassis corroded by subframe and antiroll bar mount
- Oil leak
- corrosion to both sill ends at rear
|
| 2013-10-24 | 2014-10-27 | ✓ Pass | 166,216 |
- Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
|
| 2012-10-24 | 2013-10-27 | ✓ Pass | 164,998 |
- Brake pipe slightly corroded (3.6.B.2c)
|
| 2012-10-24 | - | ✗ Fail | 164,998 |
- Rear Tyre worn close to the legal limit (4.1.E.1)
- Brake pipe slightly corroded (3.6.B.2c)
- Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
- Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
- Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
- Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2011-10-28 | 2012-10-27 | ✓ Pass | 163,748 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
- Nearside Rear coil spring corroded (2.4.C.1b)
|
| 2010-10-15 | 2011-10-17 | ✓ Pass | 160,218 |
| 2009-10-05 | 2010-10-17 | ✓ Pass | 157,587 |
| 2009-10-05 | - | ✗ Fail | 157,587 |
- Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
- Rear Exhaust has a major leak of exhaust gases (7.1.2)
|
| 2008-10-14 | 2009-10-17 | ✓ Pass | 155,946 |
| 2007-10-17 | 2008-10-17 | ✓ Pass | 153,058 |
| 2006-10-18 | 2007-10-17 | ✓ Pass | 149,061 |
| 2006-10-17 | - | ✗ Fail | 149,061 |
- Offside Rear Fuel hose leaking (7.2.3)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
- Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
- Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
- Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
|
| 2005-10-18 | 2006-10-17 | ✓ Pass | 144,084 |
Silver Mercedes C 230, manufactured in 1996, first registered on 1 October 1996. Cylinder capacity: 2295cc.