| Test date | Expiry date | Result | Odometer reading |
|---|
| 2017-05-10 | 2018-05-09 | ✓ Pass | 130,222 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive chassis (2.4.A.3)
|
| 2017-05-05 | - | ✗ Fail | 130,222 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive chassis (2.4.A.3)
- Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
|
| 2016-05-04 | 2017-05-03 | ✓ Pass | 121,487 |
- UNDER BODY HAS JUST BEEN UNDER SEALED
|
| 2015-04-29 | 2016-04-28 | ✓ Pass | 113,158 |
| 2015-04-07 | - | ✗ Fail | 113,157 |
- Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
- Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Front wheel bearing has excessive play (2.5.A.3c)
|
| 2014-09-19 | 2015-09-18 | ✓ Pass | 111,243 |
| 2014-09-04 | - | ✗ Fail | 111,243 |
- Nearside Front position lamp(s) not working (1.1.A.3b)
- Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
|
| 2013-08-22 | 2014-08-21 | ✓ Pass | 107,641 |
| 2013-04-23 | - | ✗ Fail | 107,639 |
- Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
|
| 2012-04-27 | 2013-04-28 | ✓ Pass | 104,485 |
| 2012-04-26 | - | ✗ Fail | 104,484 |
- Windscreen washer provides insufficient washer liquid (8.2.3)
- Offside Stop lamp not working (1.2.1b)
- Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
- Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
- Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
|
| 2011-04-28 | 2012-04-28 | ✓ Pass | 97,560 |
| 2011-04-28 | - | ✗ Fail | 97,560 |
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2010-04-28 | 2011-04-28 | ✓ Pass | 91,647 |
| 2009-04-29 | 2010-04-28 | ✓ Pass | 83,841 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nearside Rear Brake pad(s) wearing thin (3.5.1g)
- Offside Rear Brake pad(s) wearing thin (3.5.1g)
- Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- front tyres showing uneven wear
|
| 2008-04-08 | 2009-04-07 | ✓ Pass | 75,205 |
| 2008-04-05 | - | ✗ Fail | 75,205 |
- Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
- Front Brake pad(s) wearing thin (3.5.1g)
- Rear Brake pad(s) wearing thin (3.5.1g)
- advise brake warning light on dash
- Centre Exhaust has a major leak of exhaust gases (7.1.2)
- Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
- Rear Exhaust has a part missing (7.1.1a)
- Emissions not tested (7.0)
|
| 2007-03-22 | 2008-03-21 | ✓ Pass | 105,021 |
| 2007-03-16 | - | ✗ Fail | 105,021 |
- Nearside Front brake disc slightly pitted (3.5.1h)
- Offside Front brake disc slightly pitted (3.5.1h)
- Nearside Rear brake disc slightly pitted (3.5.1h)
- Offside Rear brake disc slightly pitted (3.5.1h)
- Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Front Windscreen wiper blade deteriorated (8.2.2)
- Exhaust has a major leak of exhaust gases (7.1.2)
- Exhaust has part of the system excessively deteriorated (7.1.1a)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
White Mazda Mpv, manufactured in 1997, first registered on 1 May 2007. Cylinder capacity: 2490cc.