| Test date | Expiry date | Result | Odometer reading |
| 2018-03-12 | 2019-03-11 | ✓ Pass | 25,755 |
- Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)
- Front fork stanchions slightly corroded
|
| 2018-03-12 | - | ✗ Fail | 25,755 |
- Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)
- Front fork stanchions slightly corroded
- Headlamp aim too high and too far to the right. (1.6)
|
| 2017-05-30 | 2018-06-11 | ✓ Pass | 25,754 |
- fork stanchions slightly pitted
- Front Front suspension has a slightly reduced damping effect (2.3.6c)
|
| 2017-05-24 | - | ✗ Fail | 25,754 |
- fork stanchions slightly pitted
- Front Front suspension has a slightly reduced damping effect (2.3.6c)
- Rear Tyre has ply or cord exposed (4.1.2a(iii)
- Rear Tyre tread not clearly visible (4.1.3(i))
- Rear Wheel has an excessively distorted bead rim. (4.2.2)
- Offside Front Footrest insecure (6.2.1a)
- Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)
- Front Brake lever has inadequate reserve travel (3.1.3b)
- Brake pedal has inadequate reserve travel (3.1.3b)
|
| 2016-05-27 | 2017-06-11 | ✓ Pass | 18,274 |
- Front Brake disc(s) slightly worn (3.2.A1l)
- Brake lever is bent but brake can still be readily applied (3.1.3c)
|
| 2016-05-24 | - | ✗ Fail | 18,274 |
- Front Brake disc(s) slightly worn (3.2.A1l)
- Front Brake fluid reservoir fluid level low (3.2.B1d)
- Brake lever is damaged but the brake can still be readily applied (3.1.3c)
- Brake lever is bent but brake can still be readily applied (3.1.3c)
- Drive chain worn to excess (6.2.1e)
- Drive chain sprocket worn to excess (6.2.1e)
- Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))
- Brake lever has inadequate reserve travel (3.1.3b)
|
| 2015-06-09 | 2016-06-11 | ✓ Pass | 9,103 |
- Front Tyre worn close to the legal limit (4.1.3(ii))
- Drive chain worn but not considered excessive (6.2.1e)
- Rear Drive chain sprocket slightly worn (6.2.1e)
- front mudguard has crack
- right hand switch gear missing retaing pegg
|
| 2014-06-12 | 2015-06-11 | ✓ Pass | 3,490 |
| 2014-06-06 | - | ✗ Fail | 3,487 |
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
- Headlamp aim headlamp damaged and function impaired (1.2.3a)
- Headlamp aim beam image kick up to the offside (1.6)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment