Test date | Expiry date | Result | Odometer reading |
2017-07-04 | - | ✗ Fail | 161,674 |
- Rear registration plate deteriorated but not likely to be misread (6.3.1d)
- Rear exhaust joint excessively corroded
- centre exhaust clamp excessively corroded
- Nearside Front wheel arch corroded
- Nearside Rear wheel arch corroded
- Offside Front Tyre worn close to the legal limit on limit (4.1.E.1)
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Front subframe and suspension components have surface corrosion
- radiator leaking
- Rear subframe and suspension components have surface corrosion
- Windscreen washer provides insufficient washer liquid (8.2.3)
- Nearside Registration plate lamp not working (1.1.C.1d)
- Emissions not tested engine overheating (7.3.A.1)
- Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is inadequately repaired sill (2.4.A.3)
- Offside Front Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)
- Offside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)
- Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
- Rear Exhaust system not adequately supported (7.1.1)
- Nearside Sub-frame corroded and seriously weakened (2.4.G.1) Dangerous
- Fuel pipe insecure filler neck assembly (7.2.1)
|
2016-08-02 | 2017-08-01 | ✓ Pass | 153,508 |
- body and under body surface rust
|
2016-07-15 | - | ✗ Fail | 153,505 |
- heavy under body surface rust corrosion
- Parking brake: efficiency below requirements (3.7.B.7)
- Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill hole and corroded (6.1.B.2)
- Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill hole and corroded (6.1.B.2)
- Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hole and corrroded (6.1.B.2)
- Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hole and corroded (6.1.B.2)
- Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch hole and corroded (6.1.B.2)
- Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point hole and corroded (6.1.B.2)
- Parking brake lever has no reserve travel (3.1.6b)
- Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
- Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- rear parking brake recording little or no effort (3.7.B.6a)
- front brake application uneven (3.7.B.2)
|
2015-10-02 | 2016-10-02 | ✓ Pass | 143,184 |
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
|
2014-10-01 | 2015-10-02 | ✓ Pass | 131,134 |
- Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
- Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Under-trays fitted obscuring some underside components
- Engine covers fitted obscuring some components in the engine bay
- vehicle has some corrosion to underside
|
2014-10-01 | - | ✗ Fail | 131,134 |
- Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
- Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Under-trays fitted obscuring some underside components
- Engine covers fitted obscuring some components in the engine bay
- vehicle has some corrosion to underside
- Nearside Rear Registration plate lamp not working (1.1.C.1d)
- Offside Rear Registration plate lamp not working (1.1.C.1d)
|
2013-10-03 | 2014-10-02 | ✓ Pass | 117,554 |
- Nearside Inner Front Body has slight corrosion (6.1.B.2)
- Offside Inner Front Body has slight corrosion (6.1.B.2)
- rear exhaust system deteriorated
|
2013-09-30 | - | ✗ Fail | 117,493 |
- Nearside Inner Front Body has slight corrosion (6.1.B.2)
- Offside Inner Front Body has slight corrosion (6.1.B.2)
- rear exhaust system deteriorated
- Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
|
2012-10-03 | 2013-10-02 | ✓ Pass | 105,784 |
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
- Nearside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
|
2011-09-20 | 2012-09-20 | ✓ Pass | 96,789 |
2010-08-27 | 2011-09-20 | ✓ Pass | 87,225 |
- Nearside Rear Brake pad(s) wearing thin (3.5.1g)
- Offside Rear Brake pad(s) wearing thin (3.5.1g)
|
2009-09-10 | 2010-09-20 | ✓ Pass | 82,691 |
- Rear Brake pad(s) wearing thin (3.5.1g)
- Heavy surface corrosion on underside and around suspension components
|
2008-09-16 | 2009-09-20 | ✓ Pass | 77,236 |
- both front flexible brake hoses secured by cable ties
- offside outer sill starting to corrode
- exhaust system corroded
|
2007-09-14 | 2008-09-20 | ✓ Pass | 72,520 |
2006-09-20 | 2007-09-20 | ✓ Pass | 63,516 |
2005-09-21 | 2006-09-20 | ✓ Pass | 48,397 |
2005-09-21 | - | ✗ Fail | 48,397 |
- Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
- Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
|