| Test date | Expiry date | Result | Odometer reading |
|---|
| 2018-05-23 | 2019-05-22 | ✓ Pass | 115,415 |
| 2017-08-25 | 2018-08-24 | ✓ Pass | 115,406 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Under-trays fitted.
- Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- O/S/F inner sill corroded/holed
|
| 2017-08-16 | - | ✗ Fail | 115,391 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Under-trays fitted.
- Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- O/S/F inner sill corroded/holed
- Battery insecure (1.9.1)
- Offside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Track control arm (2.4.G.2)
- Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement Saddle bush. (2.4.G.2)
- Nearside Rear Subframe mounting prescribed area is excessively corroded Wheel arch. (2.4.A.3)
- Offside Rear Subframe mounting prescribed area is excessively corroded Wheel arch. (2.4.A.3)
- Nearside Rear Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
- Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
|
| 2016-08-04 | 2017-08-21 | ✓ Pass | 114,609 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Engine covers fitted
- Under-trays fitted
- Inner side sills corroded
- Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
- Both rear tyres perishing and worn low on inner edge.
- O/S/R tyre valve perishing
|
| 2016-08-03 | - | ✗ Fail | 114,609 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- Engine covers fitted
- Under-trays fitted
- Inner side sills corroded
- Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
- Both rear tyres perishing and worn low on inner edge.
- O/S/R tyre valve perishing
- Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
- Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
|
| 2015-08-20 | 2016-08-21 | ✓ Pass | 101,893 |
- Nearside Rear Lower Trailing arm has slight play in a ball joint (2.4.G.2)
- Nearside Rear Inner Trailing arm has slight play in a pin/bush (2.4.G.2)
- Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
- Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
|
| 2014-08-22 | 2015-08-21 | ✓ Pass | 92,252 |
| 2013-07-23 | 2014-07-22 | ✓ Pass | 91,025 |
| 2012-07-12 | 2013-07-11 | ✓ Pass | 87,919 |
| 2011-09-24 | 2012-09-23 | ✓ Pass | 86,403 |
| 2011-01-28 | 2012-01-28 | ✓ Pass | 83,897 |
| 2011-01-20 | - | ✗ Fail | 83,897 |
- Offside Rear Brake pipe excessively corroded (3.6.B.2c)
- Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
- Nearside Front Shock absorber has a serious fluid leak (2.7.3)
|
| 2010-01-29 | 2011-01-28 | ✓ Pass | 78,955 |
| 2010-01-29 | - | ✗ Fail | 78,955 |
- Nearside Rear Shock absorber has an excessively worn bush (2.7.4)
- Offside Rear Shock absorber has an excessively worn bush (2.7.4)
|
| 2009-01-20 | 2010-01-24 | ✓ Pass | 72,377 |
| 2008-01-25 | 2009-01-24 | ✓ Pass | 65,293 |
| 2006-12-28 | 2008-01-02 | ✓ Pass | 52,732 |
- Front Brake pad(s) wearing thin (3.5.1g)
|
| 2006-01-03 | 2007-01-02 | ✓ Pass | 39,102 |
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Silver Jaguar S type, manufactured in 2003, first registered on 1 February 2003. Cylinder capacity: 2967cc, CO2 emissions: 259 g/km.