| Test date | Expiry date | Result | Odometer reading |
|---|
| 2017-10-29 | 2018-10-28 | ✓ Pass | 107,072 |
- Body has slight corrosion (6.1.B.2)
- Vehicle structure has slight corrosion (6.1.B.2)
- Brake pipe slightly corroded (3.6.B.2c)
- Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
- Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
- Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Brake pipe slightly corroded all (3.6.B.2c)
|
| 2017-10-29 | - | ✗ Fail | 107,070 |
- Body has slight corrosion (6.1.B.2)
- Vehicle structure has slight corrosion (6.1.B.2)
- Brake pipe slightly corroded (3.6.B.2c)
- Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Stop lamp not working (1.2.1b)
|
| 2017-08-26 | - | ✗ Fail | 107,059 |
- Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
- Nearside Front inner sill corroded
- Offside Front inner sill corroded
- Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
- Offside Registration plate lamp not working (1.1.C.1d)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
|
| 2016-10-15 | 2017-10-26 | ✓ Pass | 100,552 |
- Front Windscreen has crack outside of swept area
- Offside Front Body has slight corrosion sill outside of prescribed area (6.1.B.2)
- Nearside Rear Body has slight corrosion inner sill but not structural (6.1.B.2)
- Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs corroded near to shock absorbers (2.4.A.3)
- Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
|
| 2015-10-24 | 2016-10-26 | ✓ Pass | 94,857 |
- Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Offside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
|
| 2014-10-27 | 2015-10-26 | ✓ Pass | 87,101 |
| 2014-07-28 | - | ✗ Fail | 87,131 |
- Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
- Nearside Vehicle structure has slight corrosion (6.1.A.1)
- Offside Front position lamp(s) not working (1.1.A.3b)
- Offside Registration plate lamp not working (1.1.C.1d)
- Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
|
| 2013-07-09 | 2014-07-08 | ✓ Pass | 69,486 |
| 2013-07-08 | - | ✗ Fail | 69,486 |
- Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
- Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
|
| 2012-06-27 | 2013-06-26 | ✓ Pass | 56,066 |
| 2012-06-26 | - | ✗ Fail | 56,060 |
- advise water leak on engine
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
|
| 2011-06-03 | 2012-06-02 | ✓ Pass | 40,030 |
| 2010-06-01 | 2011-05-31 | ✓ Pass | 28,717 |
| 2010-06-01 | - | ✗ Fail | 28,717 |
- Nearside Stop lamp not working (1.2.1b)
- Offside Registration plate lamp not working (1.1.5c)
- Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
- Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
- Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
| 2008-09-15 | - | ✗ Fail | 20,705 |
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nail in offside rear tyre
- Registration plate lamp not working (1.1.5c)
- Body has a projection caused by damage (6.1.C.1)
|
| 2008-09-15 | 2009-09-18 | ✓ Pass | 20,705 |
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Nail in offside rear tyre
|
| 2007-09-19 | 2008-09-18 | ✓ Pass | 9,496 |
Official local mnemonic: Scotland