Test date | Expiry date | Result | Odometer reading |
2018-06-06 | 2019-06-15 | ✓ Pass | 44,086 |
2018-06-04 | - | ✗ Fail | 44,073 |
2018-05-10 | - | ✗ Fail | 44,054 |
- Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)
- Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)
- Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe (6.1.B.2)
- Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
- Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
|
2017-06-16 | 2018-06-15 | ✓ Pass | 41,120 |
2017-03-27 | - | ✗ Fail | 41,070 |
- Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor at rear subframe mount (2.4.A.3)
- Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
- Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
- Both rear axle bushes perished / splitting
- Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
- Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
- Slight judder from front brakes
- Front brake discs slightly corroded
- Nearside outer sill / doorstep corroded
- Nearside door mirror slightly loose
- Bonnet secondary catch sticking
- Nearside Front Subframe mounting prescribed area is excessively corroded floor at rear subframe mounting (2.4.A.3)
- Nearside Rear Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength outer sill at rear (2.4.A.3)
- Nearside Rear Subframe mounting prescribed area is excessively corroded outer inner sill at rear (2.4.A.3)
- Offside Rear Subframe mounting prescribed area is excessively corroded outer sill at rear (2.4.A.3)
- Offside Rear Subframe mounting prescribed area is excessively corroded outer inner sill at rear (2.4.A.3)
- Offside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch ( in behind arch liner ) (2.4.A.3)
- Front Sub-frame corroded and seriously weakened at Offside lower suspension arm front mounting point (2.4.G.1)
- Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 195/50 R15 (4.1.D.1a) Dangerous
- Windscreen wiper does not clear the windscreen effectively Both (8.2.2)
- Offside Seat belt anchorage prescribed area is excessively corroded floor at front seat mounting area (5.2.6)
|
2016-03-31 | 2017-03-30 | ✓ Pass | 40,466 |
- Brake hose has slight corrosion to ferrules all (3.6.B.4e)
- front subframe and lower arms showing corrosion
- underside of sills at rear showing corrosion
- slight judder noted from front brakes
- Sub-frame rubber bush deteriorated but not resulting in excessive movement both rear axle mounting bushes (2.4.G.2)
|
2016-03-31 | - | ✗ Fail | 40,466 |
- Brake hose has slight corrosion to ferrules all (3.6.B.4e)
- front subframe and lower arms showing corrosion
- underside of sills at rear showing corrosion
- slight judder noted from front brakes
- Sub-frame rubber bush deteriorated but not resulting in excessive movement both rear axle mounting bushes (2.4.G.2)
- Offside Rear Rear wheel bearing rough when rotated (2.6.1)
|
2015-03-02 | 2016-03-30 | ✓ Pass | 39,878 |
- rear axle mounting bushes showing wear
- handbrake cables in poor condition
- front suspension arms and subframe rusty
- bonnet safety catch sticking
- exhaust heat shields loose and flexy section in poor condition
|
2015-03-02 | - | ✗ Fail | 39,878 |
- rear axle mounting bushes showing wear
- handbrake cables in poor condition
- front suspension arms and subframe rusty
- bonnet safety catch sticking
- exhaust heat shields loose and flexy section in poor condition
- Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
|
2014-03-13 | 2015-03-30 | ✓ Pass | 39,336 |
- Front Sub-frame corroded but not seriously weakened (2.4.G.1)
- Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
- Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
- rear axle to body rubber bushes showing some wear both sides
|
2013-03-14 | 2014-03-30 | ✓ Pass | 37,540 |
- Offside front tyre right on legal limit -- 195/50 R15 --
- Both rear axle bushes perished / splitting
- Both front lower rear suspension arm bushes splitting
- Wiper blade rubbers in poor condition
|
2013-03-13 | - | ✗ Fail | 37,539 |
- Offside front tyre right on legal limit -- 195/50 R15 --
- Both rear axle bushes perished / splitting
- Both front lower rear suspension arm bushes splitting
- Fuel filter corroded and slight staining
- Wiper blade rubbers in poor condition
- Nearside Brake pipe excessively corroded (3.6.B.2c)
- Offside Brake pipe excessively corroded (3.6.B.2c)
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
2012-03-06 | 2013-03-30 | ✓ Pass | 34,258 |
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
|
2011-03-07 | 2012-03-30 | ✓ Pass | 28,946 |
- Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
|
2010-03-29 | 2011-03-30 | ✓ Pass | 26,875 |
2009-03-20 | 2010-03-30 | ✓ Pass | 23,576 |
2008-03-12 | 2009-03-30 | ✓ Pass | 20,619 |
2007-03-22 | 2008-03-30 | ✓ Pass | 15,814 |
2007-03-22 | - | ✗ Fail | 15,814 |
- Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
|
2006-03-31 | 2007-03-30 | ✓ Pass | 10,280 |