Registration plate X513GBC
Silver Mazda Mx5, manufactured in 2000, first registered on 1 September 2000. Cylinder capacity: 1840cc.
As of 6 October 2017 this vehicle had done 124,263 miles. Current estimated odometer reading: 180,600 miles.
SORN
✗ No MOT Expired: 7 October 2017

MOT history

Test dateExpiry dateResultOdometer reading
2017-10-06-✗ Fail124,263
  • Nearside Rear Brake pad(s) wearing thin (3.5.1g)
  • Nearside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
  • Offside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
  • Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
  • Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
  • Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)
  • Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)
  • Nearside Front Suspension component mounting prescribed area is excessively corroded strut (2.4.A.3)
  • Nearside Headlamp not working on main beam (1.7.5a)
  • Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
2017-10-06-✗ Fail124,263
  • Nearside Rear Brake pad(s) wearing thin (3.5.1g)
  • Nearside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
  • Offside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
  • Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
  • Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
  • Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)
  • Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar (2.4.A.3)
  • Nearside Front Suspension component mounting prescribed area is excessively corroded strut (2.4.A.3)
2016-10-062017-10-07✓ Pass118,011
  • Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Front registration plate deteriorated but not likely to be misread (6.3.1d)
  • Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • brake pedal rubber worn
2016-10-05-✗ Fail118,010
  • Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Front registration plate deteriorated but not likely to be misread (6.3.1d)
  • Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • brake pedal rubber worn
  • Front Windscreen washer provides insufficient washer liquid (8.2.3)
  • Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
  • Nearside Rear Tyre tread depth below requirements of 1.6mm 195/50x15 (4.1.E.1)
2015-09-282016-10-07✓ Pass112,051
  • Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
  • Rear Brake pad(s) wearing thin (3.5.1g)
2014-10-062015-10-07✓ Pass106,238
  • Corrostion on all suspension components
2014-10-01-✗ Fail106,238
  • Corrostion on all suspension components
  • Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
2013-10-082014-10-07✓ Pass99,052
  • Front Brake pad(s) wearing thin (3.5.1g)
2013-10-07-✗ Fail99,051
  • Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
  • Front Brake pad(s) wearing thin (3.5.1g)
  • Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
  • Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
  • rear brake application uneven (3.7.B.2)
  • rear brakes release unevenly (3.7.B.4)
2012-08-172013-09-05✓ Pass82,139
2012-08-17-✗ Fail82,138
  • Offside Front Headlamp not working on dipped beam (1.7.5a)
2011-09-052012-09-05✓ Pass73,461
2011-09-05-✗ Fail73,461
  • Nearside Front Brake pad(s) wearing thin (3.5.1g)
  • Offside Front Brake pad(s) wearing thin (3.5.1g)
  • Rear brake discs worn
  • Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
  • Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
2010-09-022011-09-05✓ Pass63,190
  • front brake discs getting badly pitted on inner faces
  • rear brake discs showing signs of wear during roller brake test
2010-09-02-✗ Fail63,190
  • front brake discs getting badly pitted on inner faces
  • rear brake discs showing signs of wear during roller brake test
  • Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
2009-08-292010-09-05✓ Pass54,467
2008-08-182009-09-05✓ Pass40,195
  • Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
  • Offside Rear Brake pipe slightly corroded (3.6.B.2c)
2007-08-312008-09-05✓ Pass30,761
2006-09-052007-09-05✓ Pass26,654
2005-09-062006-09-05✓ Pass23,413

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in October

  1. F1 XMJ
  2. 67GT
  3. B302 OCK
  4. UG04 WAY
  5. B16 KOK
  6. SX62 TWO
  7. SX61 ONE
  8. B16 COK
  9. 00LL
  10. L0 LLL

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV