Registration plate YE51USW
Official local mnemonic: Yorkshire
Postal area: Leeds
Issued: between september 2001 and february 2002
Silver Jaguar X-type v6 sport, manufactured in 2001, first registered on 1 November 2001. Cylinder capacity: 2496cc, CO2 emissions: 234 g/km.
As of 24 December 2021 this vehicle had done 127,603 miles. Current estimated odometer reading: 138,300 miles.
✗ Untaxed Tax due: 1 December 2020
✗ No MOT Expired: 22 November 2020

MOT history

Test dateExpiry dateResultOdometer reading
2021-12-242022-12-23 Pass127,603
  • Front headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
  • Front sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Front subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
  • Rear coil spring corroded both sides (5.3.1 (b) (i))
  • Rear sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
2020-12-142021-12-13 Pass123,862
  • Front headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
  • Front sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Front subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Nearside rear registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
  • Offside front tyre worn close to legal limit/worn on edge (5.2.3 (e))
  • Rear sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Rear subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Rear vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))
2020-12-12- Fail123,860
  • Front headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
  • Front sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Front subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Nearside rear registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
  • Offside front tyre worn close to legal limit/worn on edge (5.2.3 (e))
  • Rear sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Rear subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Rear vehicle structure is fractured but structural rigidity is not significantly reduced (6.1.1 (a) (i))
  • Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
  • Exhaust lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
2020-11-20- Fail123,856
  • Front sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
  • Nearside rear position lamp slightly affected by the operation of another lamp (4.2.3 (c))
  • Nearside rear suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Offside rear position lamp slightly affected by the operation of another lamp (4.2.3 (c))
  • Rear sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
  • Engine mil inoperative or indicates a malfunction (8.2.1.2 (h))
  • Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
  • Exhaust lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
  • Nearside rear anti-roll bar modified so the suspension is likely to fail other components (5.3.3 (c) (ii))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
  • Offside front side repeater not working (4.4.1 (a) (ii))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
  • Offside rear suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
2019-11-222020-11-22 Pass120,418
  • Nearside front anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
  • Nearside front suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
  • Nearside rear sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
  • Nearside rear suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Offside front suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Offside rear sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
  • Offside rear suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
2018-11-232019-11-22 Pass114,550
  • Front subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
  • Nearside front inner track rod end ball joint has slight play (2.1.3 (b) (i))
  • Nearside rear tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
  • Rear subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
2017-10-042018-10-03 Pass109,979
  • Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)
2016-10-032017-10-02 Pass106,096
2016-10-03- Fail106,096
  • Nearside front position lamp(s) not working (1.1.a.3b)
2015-09-152016-09-14 Pass102,164
2015-08-26- Fail-
  • Ecu light on dash
  • Rear exhaust pipe corroded
  • Rear subframe corroded
  • Rear anti-roll bar corroded but not seriously weakened (2.4.g.1)
  • Nearside front lower vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.a.1)
  • Nearside rear lower suspension component mounting prescribed area is excessively corroded sill (2.4.a.3)
  • Offside front lower front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.g.2)
  • Offside front lower vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.a.1)
  • Offside front obligatory mirror insecure (8.1.1)
  • Offside front outer front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.c.1a)
  • Offside rear lower suspension component mounting prescribed area is excessively corroded sill (2.4.a.3)
  • Offside rear registration plate lamp does not illuminate simultaneously with the position lamps (1.1.c.1a)
  • Offside rear upper anti-roll bar linkage insecure (2.4.g.1)
2014-09-102015-09-09 Pass99,822
  • Vehicle structure has slight corrosion (6.1.b.2)
2013-04-082014-04-07 Pass97,898
2012-07-202013-07-22 Pass96,609
2011-07-232012-07-22 Pass94,426
2011-07-12- Fail94,426
  • Brakes imbalanced across an axle (3.7.b.5b)
  • Nearside rear parking brake recording little or no effort (3.7.b.6a)
  • Nearside seat belt anchorage prescribed area is excessively corroded (5.2.6)
  • Nearside suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Offside front brake binding (3.7.b.1)
  • Offside seat belt anchorage prescribed area is excessively corroded (5.2.6)
  • Offside suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Parking brake: efficiency below requirements (3.7.b.7)
  • Rear anti-roll bar has excessive play in a pin/bush (2.4.g.2)
2010-07-172011-07-16 Pass92,496
  • Nearside rear tyre worn close to the legal limit (4.1.e.1)
2010-07-12- Fail92,422
  • Nearside rear tyre worn close to the legal limit (4.1.e.1)
  • Driver's door cannot be opened from outside the vehicle (6.2.b.1b)
  • Nearside rear parking brake recording little or no effort (3.7.b.6a)
  • Nearside rear suspension arm has excessive play in a pin/bush (2.4.g.2)
  • Offside front anti-roll bar linkage has excessive play in a ball joint (2.4.g.2)
  • Offside headlamp not working on dipped beam (1.7.5a)
  • Offside rear suspension arm has excessive play in a pin/bush (2.4.g.2)
  • Offside rear tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.d.1a)
  • Parking brake: efficiency below requirements (3.7.b.7)
2009-06-092010-07-03 Pass84,285
  • Offside front brake pipe slightly corroded (3.6.b.2c)
2009-06-09- Fail84,285
  • Nearside front brake pad(s) wearing thin (3.5.1g)
  • Nearside rear brake pad(s) wearing thin (3.5.1g)
  • Offside front brake pad(s) wearing thin (3.5.1g)
  • Offside front brake pipe slightly corroded (3.6.b.2c)
  • Offside front tyre worn close to the legal limit (4.1.e.1)
  • Offside rear brake pad(s) wearing thin (3.5.1g)
  • Nearside front tyre tread depth below requirements of 1.6mm (4.1.e.1)
  • Nearside windscreen wiper does not clear the windscreen effectively (8.2.2)
  • Offside windscreen wiper does not clear the windscreen effectively (8.2.2)
  • Parking brake: efficiency below requirements (3.7.c.1b)
2008-06-242009-07-03 Pass73,435
2008-06-24- Fail73,435
  • Nearside rear tyre tread depth below requirements of 1.6mm (4.1.e.1)
  • Offside rear tyre tread depth below requirements of 1.6mm (4.1.e.1)
2008-06-242009-07-03 Pass73,435
2008-06-24- Fail73,435
  • Brake disc slightly pitted (3.5.1h)
  • Nearside rear tyre tread depth below requirements of 1.6mm (4.1.e.1)
  • Offside front tyre tread depth below requirements of 1.6mm (4.1.e.1)
2007-07-042008-07-03 Pass59,433
  • Nearside front brake disc slightly pitted (3.5.1h)
  • Offside front brake disc slightly pitted (3.5.1h)
  • Surface cracks on both rear and osf tyres. †hand brake nearing end of travel.
2007-07-03- Fail59,433
  • Hand brake nearing end of travel.
  • Nearside front brake disc slightly pitted (3.5.1h)
  • Offside front brake disc slightly pitted (3.5.1h)
  • Surface cracks on both rear and osf tyres.
  • Nearside rear brake pipe excessively corroded (3.6.b.2c)
  • Offside rear brake pipe excessively corroded (3.6.b.2c)
2006-06-292007-06-28 Pass49,396
2006-06-232007-06-22 Pass49,395
2005-12-152006-12-14 Pass46,653
2005-12-15- Fail46,650
  • Rear shock absorber has an excessively worn bush (2.7.4)
2005-12-06- Fail46,394
  • Nearside front macpherson strut is slightly stiff in the upper support bearing assembly (2.5.b.1b)
  • Offside front macpherson strut is slightly stiff in the upper support bearing assembly (2.5.b.1b)
  • Offside rear lower suspension arm has slight play in a pin/bush (2.4.g.2)
  • Nearside front tyre has a tear, caused by separation or partial failure of its structure (4.1.d.1b)
  • Nearside rear lower shock absorber has an excessively worn bush (2.7.4)
  • Offside front tyre has ply or cords exposed (4.1.d.1b)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. LC06 OPH
  2. KP68 VDV
  3. FN66 JYU
  4. DK55 XAT
  5. KT73 ZHX
  6. RF12 HKU
  7. KV59 YWN
  8. MLP 2010
  9. B16 TAJ
  10. WG02 NFE

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV