Registration plate YS03NBB
Official local mnemonic: Yorkshire
Postal area: Sheffield
Issued: between march 2003 and august 2003
White Fiat Ducato, manufactured in 2003, first registered on 1 May 2003. Cylinder capacity: 2800cc.
As of 16 October 2015 this vehicle had done 134,833 miles. Current estimated odometer reading: 140,800 miles.
✗ Untaxed Tax due: 26 September 2017
✗ No MOT Expired: 15 October 2016

MOT history

Test dateExpiry dateResultOdometer reading
2015-10-162016-10-15 Pass134,833
  • Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
  • Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
  • Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
  • Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
  • rear valance corroded
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
2014-09-172015-09-16 Pass134,128
  • Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
  • Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
  • Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
2013-07-242014-07-25 Pass130,960
  • Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
  • Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
  • Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
  • Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
2013-04-12- Fail129,779
  • Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
  • nearside centre inner sill corroded not in prescribed area
  • Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
  • Centre Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
  • Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
  • Nearside Track rod end ball joint has excessive play (2.2.B.1f)
  • Parking brake: efficiency below requirements (3.7.B.7)
2012-07-052013-07-25 Pass125,436
2011-07-262012-07-25 Pass121,016
  • Nail in nearside rear tyre
2011-07-26- Fail121,016
  • Nail in nearside rear tyre
  • Front registration plate character(s) incorrectly spaced (6.3.4a)
  • Rear registration plate character(s) incorrectly spaced (6.3.4a)
  • Offside Stop lamp not working (1.2.1b)
  • Offside Rear Direction indicators incorrect colour (1.4.A.2f)
  • Nearside Front Direction indicators incorrect colour (1.4.A.2f)
  • Offside Front Direction indicators incorrect colour (1.4.A.2f)
  • Nearside Front position lamp(s) not working (1.1.A.3b)
  • Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
  • Rear Brake load sensing valve linkage seized (3.6.E.3)
2010-06-292011-06-28 Pass97,489
  • Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
2010-06-28- Fail97,489
  • Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
  • Service brake: efficiency below requirements (3.7.B.7)
  • rear brake application uneven (3.7.B.2)
  • Rear Brake load sensing valve linkage seized (3.6.E.3)
2009-06-252010-06-24 Pass83,199
2009-06-24- Fail83,199
  • Offside Outer Brake pad(s) wearing thin (3.5.1g)
  • Horn not working (1.6.2a)
  • Offside Stop lamp not working (1.2.1b)
  • Brake pedal anti-slip provision incomplete (3.3.A.1b)
  • Brakes imbalanced across an axle (3.7.B.5b) Dangerous
2008-05-302009-05-29 Pass71,706
2008-05-29- Fail71,706
  • Nearside Front position lamp(s) not working (1.1.A.3b)
  • Offside Headlamp not working on dipped beam (1.7.5a)
  • Offside front brake binding (3.7.B.1)
  • Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
  • Windscreen washer provides insufficient washer liquid (8.2.3)
  • Brakes imbalanced across an axle (3.7.B.5b) Dangerous
2007-08-112008-08-10 Pass66,692
2007-08-10- Fail66,692
  • Nearside Headlamp not working on dipped beam (1.7.5a)
  • Offside Registration plate lamp not working (1.1.5c)
  • Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
  • Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
  • Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
2006-05-182007-05-23 Pass55,027
2006-05-18- Fail55,027
  • Nearside Stop lamp not working (1.2.1b)
  • Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
  • Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. LC06 OPH
  2. KP68 VDV
  3. FN66 JYU
  4. DK55 XAT
  5. KT73 ZHX
  6. RF12 HKU
  7. KV59 YWN
  8. MLP 2010
  9. B16 TAJ
  10. WG02 NFE

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV