Test date | Expiry date | Result | Odometer reading |
2017-04-26 | 2018-04-28 | ✓ Pass | 8,895 |
- Front Tyre worn close to the legal limit both sides on inner edges (4.1.E.1)
- Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
- Offside Front Brake pipe slightly corroded (3.6.B.2c)
|
2017-04-26 | - | ✗ Fail | 8,895 |
- Front Tyre worn close to the legal limit both sides on inner edges (4.1.E.1)
- Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
- Offside Front Brake pipe slightly corroded (3.6.B.2c)
- Nearside Front position lamp(s) not working (1.1.A.3b)
- Nearside Headlamp not working on dipped beam (1.7.5a)
- Nearside Headlamp not working on main beam (1.7.5a)
- Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
|
2016-04-29 | 2017-04-28 | ✓ Pass | 99,125 |
- n/s and o/s sills weld repaired
- Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
|
2016-04-08 | - | ✗ Fail | 99,093 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- Exhaust has a minor leak of exhaust gases at joint to rear box (7.1.2)
- Offside Front Front position lamp(s) not working (1.1.A.3b)
- Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
- Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill has hole in it (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill has hole in it (2.4.A.3)
|
2015-04-29 | 2016-04-28 | ✓ Pass | 91,799 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- o/s/f + n/s/f floor pan + chassis rails slightly corroded
- o/s/r chassis rail slightly corroded
|
2015-04-25 | - | ✗ Fail | 91,799 |
- Offside Rear Brake pipe slightly corroded (3.6.B.2c)
- o/s/f + n/s/f floor pan + chassis rails slightly corroded
- o/s/r chassis rail slightly corroded
- Nearside Headlamp aim too low (1.8)
- Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
- Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
- Front Brakes imbalanced across an axle (3.7.B.5b)
|
2014-04-26 | 2015-04-27 | ✓ Pass | 87,359 |
2013-04-27 | 2014-04-27 | ✓ Pass | 82,182 |
- Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
|
2012-04-18 | 2013-04-27 | ✓ Pass | 74,068 |
2011-04-28 | 2012-04-27 | ✓ Pass | 66,343 |
- Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
- slight twist in n/s/r brake hose
- cracks in o/s/r tyre
|
2011-04-27 | - | ✗ Fail | 66,343 |
- Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
- slight twist in n/s/r brake hose
- cracks in o/s/r tyre
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
2010-03-15 | - | ✗ Fail | 57,895 |
- n/s/r flexi-brake pipe slightly twisted
- Nearside Headlamp aim too high (1.8)
|
2010-03-15 | 2011-03-19 | ✓ Pass | 57,895 |
- n/s/r flexi-brake pipe slightly twisted
|
2009-03-19 | 2010-03-19 | ✓ Pass | 50,313 |
2009-03-19 | - | ✗ Fail | 50,313 |
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
|
2008-03-12 | 2009-03-19 | ✓ Pass | 46,549 |
- Offside Front Tyre worn close to the legal limit (4.1.E.1)
|
2007-03-15 | 2008-03-19 | ✓ Pass | 40,346 |
- slight twist in n/s/r flexi brake hose
- steering coloum muti function switch slightly loose
|
2006-03-20 | 2007-03-19 | ✓ Pass | 33,894 |
- Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
|