| Test date | Expiry date | Result | Odometer reading |
| 2017-09-25 | 2018-09-24 | ✓ Pass | 115,317 |
| 2017-09-25 | - | ✗ Fail | 115,336 |
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Offside Front position lamp(s) not working (1.1.A.3b)
|
| 2016-12-05 | 2017-12-04 | ✓ Pass | 109,726 |
- Parking brake lever has little reserve travel (3.1.6b)
|
| 2016-11-30 | - | ✗ Fail | 109,724 |
- Offside Front brake caliper leaking (3.6.A.1) Dangerous
- Parking brake: efficiency below requirements (3.7.B.7)
- Nearside Front Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Offside Front Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
|
| 2016-11-28 | - | ✗ Fail | 109,701 |
- Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
- Offside Front Shock absorber has a light misting of oil (2.7.3)
- Nearside Rear Shock absorber has a light misting of oil (2.7.3)
- Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
- Brake pedal slightly spongy
- Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill holed. Marked with chalk (2.4.A.3)
- Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill holed. Marked with chalk (2.4.A.3)
- Offside Front Front wheel bearing rough when rotated (2.5.A.2)
- Offside Front Braking system leaking Where brake hose joins Caliper (3.6.A.1)
- Parking brake lever has no reserve travel (3.1.6b)
|
| 2015-09-29 | 2016-10-03 | ✓ Pass | 104,005 |
- Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both rear-most (2.4.G.2)
|
| 2015-09-28 | - | ✗ Fail | 104,005 |
- Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both rear-most (2.4.G.2)
- Nearside Front Shock absorber has a serious fluid leak (2.7.3)
- Rear Suspension component mounting prescribed area is excessively corroded sills both (2.4.A.3)
|
| 2014-10-04 | 2015-10-03 | ✓ Pass | 94,960 |
- Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside front brake fluctuating, but not excessively (3.7.B.3)
- rear subframe corroded
|
| 2014-09-26 | - | ✗ Fail | 94,960 |
- Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- injector leaking
- n/s rear tyre soft
- rear subframe corroded
- rear heat shield loose
- Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Parking brake: efficiency below requirements (3.7.B.7)
|
| 2013-08-17 | 2014-09-07 | ✓ Pass | 82,838 |
| 2012-08-18 | 2013-09-07 | ✓ Pass | 76,903 |
| 2011-09-02 | 2012-09-07 | ✓ Pass | 71,530 |
| 2010-08-12 | 2011-09-07 | ✓ Pass | 64,802 |
| 2009-09-08 | 2010-09-07 | ✓ Pass | 56,611 |
| 2009-09-08 | - | ✗ Fail | 56,611 |
- Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
|
| 2008-09-08 | 2009-09-07 | ✓ Pass | 43,348 |
| 2008-09-08 | - | ✗ Fail | 43,348 |
- Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Nearside rear parking brake recording little or no effort (3.7.B.6a)
- Offside rear parking brake recording little or no effort (3.7.B.6a)
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment