| Test date | Expiry date | Result | Odometer reading |
|---|
| 2016-11-28 | 2017-11-27 | ✓ Pass | 183,300 |
- Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- underside of vehicle corroded in and around prescribed areas
- both front tyres worn on edges quite badly
- chassis corroded and swollen
|
| 2016-11-14 | - | ✗ Fail | 183,166 |
- Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- underside of vehicle corroded in and around prescribed areas
- both front tyres worn on edges quite badly
- chassis corroded and swollen
- Nearside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)
- Horn not working (1.6.2a)
- Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear see yellow chalkmarks (2.4.A.3)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded see yellow chalk marks (2.4.A.3)
- Nearside Front Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
- Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Vehicle structure excessively corroded within 30cm of towbar mounting rear cross beam (6.6.6)
- Suspension spring mounting prescribed area is excessively corroded rear out riggers (2.4.A.3)
- Brake actuating linkage mounting prescribed area is excessively corroded rear sensing valve area (3.3.A.2)
- Suspension spring mounting prescribed area is excessively corroded rear floor area see yellow chalk (2.4.A.3)
- Parking brake: efficiency below requirements (3.7.B.7)
- rear brake application uneven (3.7.B.2)
|
| 2015-11-26 | 2016-11-25 | ✓ Pass | 174,980 |
- Nearside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Nearside Front inner wheel arch badly corroded
- Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch cross member mount (2.4.A.3)
|
| 2015-11-23 | - | ✗ Fail | 174,969 |
- Nearside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Nearside Front inner wheel arch badly corroded
- Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch cross member mount (2.4.A.3)
- Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
- Nearside Registration plate lamp not working (1.1.C.1d)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)
- Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
- Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
- Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch where meets floor (2.4.A.3)
- Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch where meets floor (2.4.A.3)
- Offside Front Inner Suspension component mounting prescribed area is excessively corroded step (2.4.A.3)
- Nearside Front Inner Suspension component mounting prescribed area is excessively corroded step (2.4.A.3)
- Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member (2.4.A.3)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member (2.4.A.3)
|
| 2014-10-29 | 2015-11-15 | ✓ Pass | 164,973 |
- Nearside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Offside Front Front wheel bearing has slight play (2.5.A.3c)
- Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- underneath of veichle has been underseald
- cebter exhaust outer skin corroded
|
| 2014-10-21 | - | ✗ Fail | 164,945 |
- Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1)
- Centre Brake pipe slightly corroded (3.6.B.2c)
- underside of vehicle badly corroded
- Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
- Offside Headlamp not working on dipped beam (1.7.5a)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
- Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
- Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
- Front Track rod end ball joint has excessive play (2.2.B.1f) Dangerous
- Offside rear parking brake recording little or no effort (3.7.B.6a) Dangerous
- Brake load sensing valve seized (3.6.E.3) Dangerous
- Nearside Front wheel bearing rough when rotated (2.5.A.2) Dangerous
- Parking brake: efficiency below requirements (3.7.B.7) Dangerous
|
| 2013-11-04 | 2014-11-15 | ✓ Pass | 156,101 |
- advanced corrosion through out
|
| 2013-10-25 | - | ✗ Fail | 156,095 |
- door steps and sills badly corroded
- corrosion through out chassis
- Nearside Electrical wiring inadequately supported (1.9.2a)
- Registration plate lamp not working (1.1.C.1d)
- Offside Front Brake pipe inadequately supported (3.6.B.1) Dangerous
- Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
- Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
- Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
|
| 2012-11-16 | 2013-11-15 | ✓ Pass | 148,389 |
- Nearside Brake pipe slightly corroded (3.6.B.2c)
- Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- engine has a misfire
|
| 2012-11-15 | - | ✗ Fail | 148,368 |
- Nearside Brake pipe slightly corroded (3.6.B.2c)
- Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
- engine has a misfire
- Horn not loud enough to be heard by another road user (1.6.2b)
- Nearside Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
|
| 2011-11-02 | 2012-11-01 | ✓ Pass | 141,612 |
| 2011-10-21 | - | ✗ Fail | 141,458 |
- Fuel system component leaking (7.2.3)
- Offside Front Brake pipe excessively corroded (3.6.B.2c)
- Centre Exhaust has a major leak of exhaust gases (7.1.2)
- Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
- Emissions not tested (7.0)
|
| 2010-10-29 | 2011-10-28 | ✓ Pass | 138,252 |
| 2010-10-27 | - | ✗ Fail | 138,235 |
- Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
- Nearside Registration plate lamp not working (1.1.C.1d)
- Offside Headlamp not working on dipped beam (1.7.5a)
- Offside Track rod end ball joint has excessive play (2.2.B.1f)
- Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
|
| 2009-10-13 | 2010-10-24 | ✓ Pass | 133,972 |
- nail in tread o/s front tyre
|
| 2008-10-24 | 2009-10-24 | ✓ Pass | 130,241 |
| 2007-10-25 | 2008-10-24 | ✓ Pass | 31,832 |
| 2006-06-01 | 2007-06-10 | ✓ Pass | 94,939 |
| 2006-06-01 | - | ✗ Fail | 94,937 |
- Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
|
Official local mnemonic: Cymru (Wales)