Registration plate EY02WKW
Official local mnemonic: Essex
Postal area: Chelmsford
Issued: between march 2002 and august 2002
Red Ford Transit 280 swb td, manufactured in 2002, first registered on 1 March 2002. Cylinder capacity: 1998cc.
As of 24 April 2023 this vehicle had done 138,096 miles. Current estimated odometer reading: 145,800 miles.
✗ Untaxed Tax due: 1 December 2020
✗ No MOT Expired: 16 December 2020

MOT history

Test dateExpiry dateResultOdometer reading
2023-04-242024-04-23 Pass138,096
2023-04-21- Fail137,968
  • Nearside front position lamp not working (4.2.1 (a) (ii))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mount (5.3.6 (a) (i))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i))
2022-04-062023-04-22 Pass132,737
  • Corrosion to sills chassis and floor
  • Offside front brake pipe corroded, covered in grease or other material (1.1.11 (c))
  • Offside obligatory mirror slightly damaged (3.3 (b) (i))
  • Offside rear brake pipe corroded, covered in grease or other material (1.1.11 (c))
2022-03-29- Fail132,663
  • Corrosion to sills chassis and floor
  • Offside front brake pipe corroded, covered in grease or other material (1.1.11 (c))
  • Offside obligatory mirror slightly damaged (3.3 (b) (i))
  • Offside rear brake pipe corroded, covered in grease or other material (1.1.11 (c))
  • Nearside front suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel well (5.3.6 (a) (i))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
  • Nearside stop lamp(s) not working (4.3.1 (a) (ii))
  • Offside rear shock absorbers has a serious fluid leak (5.3.2 (b))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel well (5.3.6 (a) (i))
  • Offside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
2021-04-232022-04-22 Pass131,765
  • Heavy corrosion to body, sills, chassis and floor
  • Offside front obligatory mirror slightly damaged (3.3 (b) (i))
  • Oil leak, but not excessive (8.4.1 (a) (i))
  • Welded repairs covered in underseal
2021-04-13- Fail131,699
  • Heavy corrosion to body, sills, chassis and floor
  • Offside front obligatory mirror slightly damaged (3.3 (b) (i))
  • Oil leak, but not excessive (8.4.1 (a) (i))
  • Nearside front suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front chassis leg (5.3.6 (a) (i))
  • Offside front inner seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
  • Offside front outer seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
2019-12-172020-12-16 Pass129,082
  • Front anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
2019-12-12- Fail129,082
  • Front anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
  • Front lower suspension arm ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii))
  • Front windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
  • Horn not working (7.7 (a) (ii))
  • Nearside front suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i))
  • Nearside rear suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i))
  • Nearside rear tyre tread depth below requirements of 1.6mm (5.2.3 (e))
  • Offside front suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mopunt (5.3.6 (a) (i))
  • Offside rear outer suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
  • Offside rear suspension component mounting prescribed area excessively damaged significantly reducing structural strength leaf spring mount (5.3.6 (a) (i))
2018-05-252019-05-24 Pass125,508
  • Coolant leak ()
  • Coolant level low
  • Corrosion to body, chassis and sills
  • Metal brake pipes corroded
  • Nearside rear tyre wearing low and perished
  • Offside and nearside front brake discs corroded
  • Oil leak, but not excessive (8.4.1 (a) (i))
  • Welded repairs covered in undersill
2018-04-05- Fail125,432
  • Coolant leak ()
  • Corrosion to body, chassis and sills
  • Metal brake pipes corroded
  • Nearside front brake pad(s) wearing thin (3.5.1g)
  • Nearside rear tyre wearing low and perished
  • Offside and nearside front brake discs corroded
  • Oil leak ()
  • Front windscreen has damage to an area in excess of a 10mm circle within zone 'a' (8.3.1a)
  • Nearside rear brake actuating linkage mounting prescribed area is excessively corroded chassis (3.3.a.2)
  • Nearside rear suspension component mounting prescribed area is excessively corroded cross member (2.4.a.3)
  • Nearside rear suspension component mounting prescribed area is excessively corroded inner sill (2.4.a.3)
  • Nearside rear suspension component mounting prescribed area is excessively corroded outer sill (2.4.a.3)
  • Nearside rear suspension spring mounting prescribed area is excessively corroded (2.4.a.3)
  • Offside front brake pad(s) less than 1.5 mm thick (3.5.1g)
  • Offside rear suspension component mounting prescribed area is excessively corroded chassis (2.4.a.3)
  • Offside rear suspension component mounting prescribed area is excessively corroded inner sill (2.4.a.3)
  • Offside rear suspension component mounting prescribed area is excessively corroded outer sill (2.4.a.3)
  • Offside rear suspension spring mounting prescribed area is excessively corroded (2.4.a.3)
  • Offside rear tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.d.1a)
  • Offside windscreen wiper does not clear the windscreen effectively (8.2.2)
  • Rear brakes imbalanced across an axle axle 2 (3.7.b.5b)
2017-04-242018-04-23 Pass121,880
  • Corrosion to body, chassis and offside and nearside sills
  • Offside and nearside front brake pads appear to be worn low
2017-04-24- Fail121,880
  • Corrosion to body, chassis and offside and nearside sills
  • Offside and nearside front brake pads appear to be worn low
  • Nearside stop lamp adversely affected by the operation of another lamp (1.2.1f)
2015-05-142016-05-13 Pass112,667
  • Nearside rear suspension component mounting prescribed area is corroded but not considered excessive (2.4.a.3)
  • Offside rear suspension component mounting prescribed area is corroded but not considered excessive (2.4.a.3)
2015-05-13- Fail112,667
  • Nearside rear suspension component mounting prescribed area is corroded but not considered excessive (2.4.a.3)
  • Offside rear suspension component mounting prescribed area is corroded but not considered excessive (2.4.a.3)
  • Brake load sensing valve seized (3.6.e.3)
  • Nearside headlamp aim too high (1.8)
  • Nearside rear suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Nearside rear suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Nearside rear suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Offside front lower suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.g.2)
  • Offside front tyre tread depth below requirements of 1.6mm (4.1.e.1)
  • Offside headlamp aim too low (1.8)
  • Offside rear suspension component mounting prescribed area is excessively corroded (2.4.a.3)
  • Rear registration plate delaminated (6.3.1d)
2014-01-232015-01-22 Pass106,838
  • Offside front suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.g.2)
2013-02-192014-03-06 Pass104,780
  • Advise mid exhaust silencer advanced corrosion on outer skin
  • Advise rear gearbox stay slight movement
  • Exhaust has a minor leak of exhaust gases (7.1.2)
  • Offside front anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.g.2)
  • Offside front suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.g.2)
  • Rear chassis corroded
2013-02-18- Fail104,780
  • Rear chassis corroded
  • Nearside suspension component mounting prescribed area is excessively corroded (2.4.a.3)
2012-03-052013-03-06 Pass102,661
  • Exhaust box deteriated
  • Offside front suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.g.2)
2011-03-072012-03-06 Pass98,108
2010-10-302011-10-29 Pass95,770
2009-07-222010-07-21 Pass88,588
  • Rear registration plate slightly deteriorated
2009-07-22- Fail88,588
  • Rear registration plate slightly deteriorated
  • Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'a' (8.3.1e)
2008-07-092009-07-08 Pass82,868
2007-03-262008-03-28 Pass74,742
2006-03-282007-03-28 Pass61,902

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in October

  1. B16 TAJ
  2. SL63 CKC
  3. MA17 JYL
  4. LF15 BWX
  5. A005 DJK
  6. MT56 WOA
  7. LP68 ZDK
  8. LJ22 UCT
  9. SK74 UHL
  10. WM60 HHG

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV