Registration plate HG53FGP
Official local mnemonic: Hampshire and Dorset
Postal area: Bournemouth
Issued: between september 2003 and february 2004
Silver Mazda 6, manufactured in 2003, first registered on 1 October 2003. Cylinder capacity: 1998cc, CO2 emissions: 176 g/km.
As of 25 October 2016 this vehicle had done 144,697 miles. Current estimated odometer reading: 172,000 miles.
✗ Untaxed Tax due: 12 July 2017
✗ No MOT Expired: 24 October 2017

MOT history

Test dateExpiry dateResultOdometer reading
2016-10-252017-10-24✓ Pass144,697
  • General advanced corrosion in rear of vehicle,benifit attention
2016-10-18-✗ Fail144,604
  • General advanced corrosion in rear of vehicle,benifit attention
  • Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end and inner arch area (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is excessively corroded sill end and inner arch area (2.4.A.3)
  • Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
2015-10-222016-10-23✓ Pass141,278
  • Front both tyres worn on inner and outer edges
  • Offside Rear Tyre worn close to the legal limit on inner edge (4.1.E.1)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
  • Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • general rear corrosion
2015-10-15-✗ Fail141,202
  • Front both tyres worn on inner and outer edges
  • Offside Rear Tyre worn close to the legal limit on inner edge (4.1.E.1)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
  • Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • general rear corrosion
  • Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)
  • Offside Front position lamp(s) not working (1.1.A.3b)
  • Offside Front Lower Suspension arm has excessive play in a ball joint front (2.4.G.2)
  • Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
2014-10-242015-10-23✓ Pass136,721
  • Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Nearside Outer Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Outer Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
  • center brake light not working
  • general corrosion
2014-10-24-✗ Fail136,721
  • Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Nearside Outer Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Offside Outer Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
  • Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
  • Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
  • center brake light not working
  • general corrosion
  • Offside Registration plate lamp not working (1.1.C.1d)
  • Offside Front position lamp(s) not working (1.1.A.3b)
  • Windscreen washer provides insufficient washer liquid (8.2.3)
2013-10-042014-10-22✓ Pass130,567
  • Front Brake pad(s) wearing thin (3.5.1g)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
  • Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • center brake light not working
  • offside front suspension creaking
  • nearside front tyre worn on outer edge
2013-10-04-✗ Fail130,567
  • Front Brake pad(s) wearing thin (3.5.1g)
  • Rear Brake pad(s) wearing thin (3.5.1g)
  • Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
  • Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
  • center brake light not working
  • offside front suspension creaking
  • nearside front tyre worn on outer edge
  • Offside Registration plate lamp not working (1.1.C.1d)
2012-10-232013-10-22✓ Pass125,670
  • Front Brake pad(s) wearing thin (3.5.1g)
2012-10-23-✗ Fail125,670
  • Front Brake pad(s) wearing thin (3.5.1g)
  • Offside Headlamp not working on dipped beam (1.7.5a)
2011-10-122012-10-11✓ Pass118,262
2011-10-12-✗ Fail118,262
  • Offside Registration plate lamp not working (1.1.C.1d)
  • Nearside Front Headlamp aim too low (1.8)
  • Offside Front Headlamp aim too high (1.8)
2010-09-222011-10-11✓ Pass111,597
2009-10-122010-10-11✓ Pass99,444
2008-10-082009-10-09✓ Pass85,119
2008-10-07-✗ Fail85,119
  • Nearside Inner Front Road wheel bead rim badly distorted (4.2.A.1a)
  • Nearside Rear Registration plate lamp not working (1.1.5c)
  • Nearside Front Front position lamp(s) not working (1.1.A.3b)
  • Offside Front Front position lamp(s) not working (1.1.A.3b)
2007-10-042008-10-09✓ Pass66,639
2006-09-122007-10-09✓ Pass49,804

Comments

No comments.

Add comment

Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment
Select files
You agree that you accept our rules

Worst drivers in November

  1. LC06 OPH
  2. KP68 VDV
  3. FN66 JYU
  4. DK55 XAT
  5. KT73 ZHX
  6. RF12 HKU
  7. KV59 YWN
  8. MLP 2010
  9. B16 TAJ
  10. WG02 NFE

View drivers' rankings from previous months »

Do you like us?
or transfer some Bitcoins to 1L9Sd6UhYrugmYzp8Zv4iQtZoLRLdvWHPV