Test date | Expiry date | Result | Odometer reading |
2012-02-13 | 2013-02-12 | ✓ Pass | 17,987 |
2012-02-09 | - | ✗ Fail | 17,956 |
- Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)
- Steering movement excessively stiff with the wheel raised (2.2.1b)
- Steering movement excessively rough with the wheel raised (2.2.1b)
|
2011-02-05 | 2012-02-04 | ✓ Pass | 15,507 |
2011-02-04 | - | ✗ Fail | 15,482 |
- Rear Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))
- Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
- Rear Front mudguard insecure (2.3.7)
- Rear shock absorber seal failed and leaking oil (2.4.A.1c)
- Offside Front Front position lamp missing (1.1.1a)
- Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)
|
2009-10-03 | 2010-10-02 | ✓ Pass | 13,125 |
- nearside indcator lens missing
- front folks have surface rust
|
2009-09-18 | - | ✗ Fail | 12,944 |
- Upper Front suspension assembly slightly corroded. (2.3.1)
- Front Brake lever is inoperative (3.1.3c)
- Nearside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)
- Headlamp aim too high (1.6)
- Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)
|
2008-11-19 | 2009-12-12 | ✓ Pass | 12,136 |
- Rear Brake lever is short but brake can still be readily applied (3.1.3c)
- long travel on front brake lever
|
2008-11-12 | - | ✗ Fail | 12,162 |
- Rear Brake lever is short but brake can still be readily applied (3.1.3c)
- long travel on front brake lever
- Stop lamp remains on when the brake is released (1.3.1e)
|
2007-12-13 | 2008-12-12 | ✓ Pass | 12,099 |
- Rear Brake lever is short but brake can still be readily applied (3.1.3c)
- n/side indicator lens missing
- rear tail light lens outer missing
- number plate light missing
|
Attaching movies and photos (?)
It's enough to include link to photo or youtube or facebook movie into comment's content in order to attach them to the comment