| Test date | Expiry date | Result | Odometer reading |
| 2017-01-11 | 2018-01-28 | ✓ Pass | 91,101 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- knocking from the front end, but all suspension and steering joints are in good order
|
| 2017-01-11 | - | ✗ Fail | 91,101 |
- Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
- knocking from the front end, but all suspension and steering joints are in good order
- Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
|
| 2016-01-20 | 2017-01-28 | ✓ Pass | 87,320 |
- play in nearside inner rack joint
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
|
| 2016-01-20 | - | ✗ Fail | 87,320 |
- play in nearside inner rack joint
- Nearside Front Tyre worn close to the legal limit (4.1.E.1)
- Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
|
| 2015-01-13 | 2016-01-28 | ✓ Pass | 84,980 |
| 2015-01-13 | - | ✗ Fail | 84,980 |
- Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
- Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
- offside rear tyre perished and inner edge unevenly worn
- Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
|
| 2014-01-21 | 2015-01-28 | ✓ Pass | 81,199 |
- Steering system slightly tight (2.2.D.1)
- Front Brake pad(s) wearing thin (3.5.1g)
- Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
- Play in steering rack inner joint(s)
- Exhaust system corroded.
- Offside front body has slight damage.
|
| 2014-01-21 | - | ✗ Fail | 81,197 |
- Steering system slightly tight (2.2.D.1)
- Front Brake pad(s) wearing thin (3.5.1g)
- Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
- Play in steering rack inner joint(s)
- Exhaust system corroded.
- Offside front body has slight damage.
- Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
- Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
- Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Offside Front Tyre has ply or cords exposed (4.1.D.1b) Dangerous
- Parking brake: efficiency below requirements (3.7.B.7)
|
| 2013-01-23 | 2014-01-28 | ✓ Pass | 77,543 |
- Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
|
| 2013-01-23 | - | ✗ Fail | 77,543 |
- Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
- Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
- Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
- Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
- Parking brake: efficiency below requirements (3.7.B.7)
|
| 2012-01-17 | 2013-01-28 | ✓ Pass | 73,779 |
| 2012-01-17 | - | ✗ Fail | 73,779 |
- Offside Front Front constant velocity joint is insecure (2.5.C.1b)
- Nearside Rear Stop lamp not working (1.2.1b)
- Nearside Rear Direction indicators incorrect colour (1.4.A.2f)
|
| 2011-01-19 | 2012-01-28 | ✓ Pass | 69,142 |
| 2010-01-14 | - | ✗ Fail | 64,184 |
- Exhaust has part of the system slightly deteriorated (7.1.1a)
- front tyres worn on inner edges
- Offside Headlamp not working on dipped beam (1.7.5a)
|
| 2010-01-14 | 2011-01-28 | ✓ Pass | 64,184 |
- Exhaust has part of the system slightly deteriorated (7.1.1a)
- front tyres worn on inner edges
|
| 2009-01-12 | 2010-01-28 | ✓ Pass | 58,915 |
|
| 2008-01-09 | 2009-01-28 | ✓ Pass | 53,199 |
- Nearside Rear Brake pad(s) wearing thin (3.5.1g)
- Offside Rear Brake pad(s) wearing thin (3.5.1g)
|
| 2007-01-29 | 2008-01-28 | ✓ Pass | 47,319 |
| 2006-07-27 | 2007-07-26 | ✓ Pass | 45,063 |
| 2006-07-27 | - | ✗ Fail | 45,063 |
- Nearside Headlamp not working on dipped beam (1.7.5a)
|